HYBRID UNCERTAINTY QUANTIFICATION IN METAL ALLOY POWDER COMPACTION
نویسندگان
چکیده
منابع مشابه
Experimental Investigation of Metal Powder Compaction without Using Lubricant
The main objective of this work was to design a novel device for compaction of metal powders so that the green parts could be ejected with applying a negligible force and without the need for any lubricant in either an admixed form or applied to the die wall. For this purpose a 40 mm diameter one-piece die was envisaged which would elastically contracted 0.076 mm before compaction and after com...
متن کاملForward and Backward Uncertainty Quantification in Optimization
This contribution gathers some of the ingredients presented during the Iranian Operational Research community gathering in Babolsar in 2019.It is a collection of several previous publications on how to set up an uncertainty quantification (UQ) cascade with ingredients of growing computational complexity for both forward and reverse uncertainty propagation.
متن کاملCompaction of Commercially Pure Titanium Powder by Friction Powder Compaction Process
A new friction powder compaction (FPC) process is introduced for compacting commercially pure titanium powder. The FPC process is very simple and energy-efficient since it requires only a rotating tool plunged into an aluminum plate with a hole filled with titanium powder, and no external heat source is necessary. The sintering of the powder is mainly achieved by the friction heat and pressing ...
متن کاملConstitutive Equation for Powder Compaction Incorporating Powder Charecteristics
The increasing importance of powdered materials fabrication has led to an increasing emphasis on the understanding of the powder behavior during compaction. During compaction, a powder mass undergoes densification owing to various mechanisms, i.e. sliding, rotation, deformation and/or fracturing of the constituent particles. These densification mechanisms are very dependent upon the powder char...
متن کاملEffect of Compaction Temperature on the Lubricant Distribution in Powder Metal Parts
Warm compaction is a process leading to parts with high green strength and density. An increased compacting temperature lowers the flow stress of the metallic particles and increases their ductility, resulting in higher powder compressibility and stronger interparticles bonding, either mechanical or metallurgical. Although many studies have been published on warm compaction, very few investigat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Anais do Congresso Internacional de Engenharia Mecânica e Industrial
سال: 2023
ISSN: ['2764-4294']
DOI: https://doi.org/10.29327/xxiiconemi.572539