Hybrid energy storage system design for mobile multi-material fused deposition modeling
نویسندگان
چکیده
منابع مشابه
Power Distribution Development and Optimization of Hybrid Energy Storage System
In this paper, the development and optimization of Power Distribution Control Strategy (PDCS) have been performed for a Hybrid Energy Storage Systems (HESS) of a Series Hybrid Electric Bus (SHEB). A common PDCS is based on the use of Ultra-Capacitor (UC) pack. A new simple PDCS is developed as a battery based one. For the battery based PDCS, four parameters ar...
متن کاملCurved Layer Fused Deposition Modeling
Current Fused Deposition Modeling (FDM) technologies deposit material as flat layers. The result is a “stair-case” effect on non-vertical or horizontal surfaces, and compromised part strength because of weakness between the laminations. This paper describes a FDM method through which layers of build material are deposited as curved layers following the shape of the part, thus removing the stair...
متن کاملAdvanced Hybrid Energy Storage System for Mild Hybrid Electric Vehicles
−Hybrid electric vehicles (HEV) utilize electric power and a mechanical engine for propulsion; therefore, the performance of HEVs is directly influenced by the characteristics of the energy storage system (ESS). The ESS for an\ HEV generally requires high power performance, long cycle life, reliability and cost effectiveness; thus, a hybrid energy storage system (HESS) that combines different t...
متن کاملMulti-objective Optimal Sizing and Energy Management of Hybrid Energy Storage System for Electric Vehicles
Hybrid energy storage system (HESS) composed of lithium-ion battery and supercapacitors has been recognized as one of the most promising solutions to face against the high cost, low power density and short cycle life of the battery-only energy storage system, which is the major headache hindering the further penetration of electric vehicles. In this work, the HESS sizing and energy management p...
متن کاملHybrid energy storage optimal sizing for an e-bike
The Energy Storage System (ESS) is an expensive component of an E-bike. The idea of Hybrid Energy Storage System (HESS), a combination between battery and Ultra-Capacitor (UC), can moderate the cost of E-bike ESS. In this paper, a cost function is developed to use for optimal sizing of a HESS. This cost function is consisted of the HESS (battery, UC and DC/DC converter) cost and the cost of bat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: AIP Advances
سال: 2020
ISSN: 2158-3226
DOI: 10.1063/5.0014097