Hybrid Effects on Tensile Properties of Carbon⁄Glass Angle Ply Composites

Mechanical Properties of Angle Ply Laminated Composites- A Review

The purpose of this study is to review many of the available guidelines for Polymer composite materials. Guide lines for failure mode, laminates orientation, winding angle, water absorption, as they strongly influence the mechanical properties of composite materials. The present review is focused on composite laminates made of glass, carbon, graphite, hybrid and natural fiber composites, since ...

INTRAPLY HYBRID COMPOSITES BASED ON BASALT AND NYLON WOVEN FABRICS: TENSILE AND COMPRESSIVE PROPERTIES

In this study, the tensile and compressive behaviors of pure and hybrid composite laminates reinforced by basalt–nylon bi-woven intra-ply fabrics were experimentally investigated. Epoxy resin was used as the matrix material. The purpose of using this hybrid composite is to obtain superior characteristics by using the good strength property of basalt fiber with the excellent toughness of ny...

Study on Bending Damage of Intra-Ply Basalt/Nylon Hybrid Composites

Effect of Nanoclay on Tensile Properties of Hybrid Polymer matrix Composites

---------------------------------------------------------------------***--------------------------------------------------------------------Abstract Composite materials are widely used because of their extreme properties. Researchers working on fabrication of new composite materials worldwide to enhance the applicability of these materials. There are very few works about the effect of nanoclay ...

Investigation of Mode I Delamination Resistance in Inter-ply and Intra-ply Hybrid Composites Reinforced with Basalt/Nylon Woven Fabrics

Due to their sensitivity to impact-induced delamination, woven fabric reinforced polymer composites have limited practical applications. Hybridization of polymer composites has been proposed as a solution to this problem. In this study, the effects of fiber reinforcement type, hybridization method, plies stacking sequence and loading rate on mode I delamination behavior of pure basalt, pure nyl...