Hybrid Brush Pocket Damper Seals for Turbomachinery
نویسندگان
چکیده
منابع مشابه
Dynamic Modeling of Underplateform Damper used in Turbomachinery
The present work deals with the structural analysis of turbine blades and modeling of turbine blades. A common failure mode for turbine machines is high cycle of fatigue of compressor and turbine blades due to high dynamic stresses caused by blade vibration and resonance within the operation range of the machinery. In this work, proper damping system will be analyzed to reduce the vibrating bla...
متن کاملDynamic Characterization of Fully Partitioned Damper Seals NEW PROPOSAL
Balance piston seals are subjected to large pressure differential and can generate large forces directly impacting the stability of centrifugal compressors. The most common designs are textured seals such as honeycomb, hole-pattern seals, and pocketed seals including pocket damper seals (PDS) and fully partition damper seals (FPDS), shown in Fig. 1. The dynamic performance of textured seals hav...
متن کاملOPTIMAL HYBRID BASE ISOLATION AND MR DAMPER
In this paper, optimal design of hybrid low damping base isolation and magnetorheological (MR) damper has been studied. Optimal hybrid base isolation system has been designed to minimize the maximum base drift of low damping base isolation system where for solving the optimization problem, genetic algorithm (GA) has been used. In design procedure the maximum acceleration of the structure has ...
متن کاملGas Damper Seal Test Results, Theoretical Correlation, and Applications in Desi
The rotordynamic and leaking characteristics of two types of gas damper seals, honeycomb seal and pocket damper seal, were experimentally evaluated on a rotating test rig. The effect of supply pressure, preswirl, and seal eccentricity on seal dynamic performance was investigated in the tests. The pressurized working gas flowed through the seal and exhausted to atmospheric conditions. The maximu...
متن کاملFlow Seals Parameters Analysis For Rotors
The interaction of work fluid mechanics with that of the rotary system itself, basically composed of axes, bearings and rotors, is performed by inserting equivalent dynamic coefficients in the mathematical model of the rotor, the latter being obtained by the finite element method. In this paper, the dynamic coefficients of inertia, stiffness and damping of the flat seals analyzed here are evalu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Engineering for Gas Turbines and Power
سال: 2000
ISSN: 0742-4795,1528-8919
DOI: 10.1115/1.483211