HRTEM Studies of Stress Assisted Sintered BaLa4Ti4O15
نویسندگان
چکیده
منابع مشابه
HRTEM studies of NiNbZr + Ag amorphous-nanocrystalline composites.
Amorphous powder of composition corresponding to Ni60Ti20Zr20 (in at%) was obtained by ball milling in a high-energy mills starting from pure elements. Formation of the amorphous structure was observed already after 20 h of milling, although complete amorphization occurred after 40 h. The microhardness of powders increased from about 30 HV for pure elements to above 400 HV (1290 MPa) after 40 h...
متن کاملSintered hydroxyapatite ceramic for wear studies.
A sintered hydroxyapatite (HAP) ceramic for use in wear studies was prepared from a commercial tricalcium phosphate. The sintered HAP had physical properties close to those of human enamel. The coefficient of friction and wear of the sintered HAP ceramic as characterized by tangential force, track width, and surface failure data, approximated those of human enamel.
متن کاملDefect Structures in CuZr Martensite, Studies by CTEM and HRTEM
Defect structures in CuZr martensite are studied by conventional and high-resolution transmission electron microscopy. Two different types of planar defects are observed. It is concluded that both defect types can be inherited from anti-phase boundaries in the austenite phase. With respect to the martensitic transformation, both defect types can be explained by the different shuffles of atoms a...
متن کاملStress Intensity of Delamination in a Sintered-Silver Interconnection: Preprint
In automotive power electronics packages, conventional thermal interface materials such as greases, gels, and phase-change materials pose bottlenecks to heat removal and are also associated with reliability concerns. The industry trend is toward high thermal performance bonded interfaces for large-area attachments. However, because of coefficient of thermal expansion mismatches between material...
متن کاملEx-situ studies on calcinations of structural, optical and morphological properties of post-growth nanoparticles CeO2 by HRTEM and SAED
Nanocrystalline particles of Cerium Oxide (CeO2) have been prepared by the chemical precipitation method using Cerium nitrate and Urea with a molar ratio of 1:2. The results revealed that the formation of CeO2 fine particles is influenced by molar ratio of metal nitrates to fuel. Well faceted CeO2 nanoparticles, were synthesized by thermal-assisted dissociation ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2015
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s143192761501404x