Hot Workability of 300M Steel Investigated by In Situ and Ex Situ Compression Tests
نویسندگان
چکیده
منابع مشابه
Fabrication of Ti3SiC2-SiC max phase composites via in-situ and ex-situ synthesis
Recently, a series of three-component compounds with the combination of Mn+1AXn known as Max phases have been considered as a new material. One of the most important features of Max phases, is the self-healing property of them. The main reason for considering Max Phases is a unique collection of unusual properties including their metallic, ceramic, physical, and mechanical properties. One of th...
متن کاملDynamic Recrystallization and Hot Workability of 316LN Stainless Steel
Chaoyang Sun 1,*, Yu Xiang 1, Qingjun Zhou 2, Denis J. Politis 3, Zhihui Sun 1,* and Mengqi Wang 1 1 School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China; [email protected] (Y.X.); [email protected] (M.W.) 2 Capital Aerospace Machinery Company, Beijing 100076, China; [email protected] 3 Department of Mechanical Engineering, Imperial Co...
متن کاملOptimization of Hot Workability in Ti-IF Steel by Using the Processing Map
Processing map for hot working of Ti-IF steel has been developed in the temperature range of 750 to 1100 °C and strain rate of 0.01 to 100 s-1. This map in the austenite region exhibits a single domain with a peak efficiency of 45% occurring at 1025 °C and strain rate of 0.02 s-1. The domain extends over the temperature range of 1000 to 1100 °C and strain rate range of 0.01 to 1 s-1. The true s...
متن کاملIntegrating Ex situ and In situ Conservation of Lemurs
Site-based and cross-regional habitat and species conservation e!orts in Madagascar, such as proposed in the previous chapters of this Lemur Conservation Strategy, should always be the main focus of lemur conservation. However, with many wild lemur populations rapidly declining and their habitat being lost at constantly high rates, captive assurance colonies are becoming increasingly important,...
متن کاملEVALUATING HOT DEFORMATION BEHAVIOR OF W360 TOOL STEEL BY HOT COMPRESSION TEST
In this research, the hot deformation behavior of W360 tool steel was investigated using hot compression test at 1000-1200°C and strain rates of 0.001, 0.01, 0.1, and 1 s-1. According to the results, dynamic recrystallization was found the most important restoration factor of this alloy during hot deformation. Recrystallization was enhanced with an increase in temperature and strain rate. Also,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2019
ISSN: 2075-4701
DOI: 10.3390/met9080880