Hot Strip Mill Processing Simulations on a Ti-Mo Microalloyed Steel Using Hot Torsion Testing
نویسندگان
چکیده
منابع مشابه
Metallurgically Consistent Determination of Steel Hot Strength Using Process Data from Hot Strip Mill Rolling
It is not rare to observe an inverse relationship between hot strength determined from rolling load of the finishing stands of the hot strip mill and strain. This situation was already described in the literature and is explained by the use of inverse rolling load models that assumes sticking friction in the determination of hot strength. The aim of this work was to show that this “work softeni...
متن کاملIntegration of Continuous Caster and Hot Strip Mill Planning for Steel Production 9/11/99 Integration of Continuous Caster and Hot Strip Mill Planning for Steel Production
In this paper we present a model and a solution approach for integration of steel continuous casters and hot strip mills to provide more responsive steel production at lower unit cost. We describe the production environment and survey existing methods for planning continuous casters and hot strip mills. Since these processes lie at the solid/liquid interface we use “virtual” slabs, correspondin...
متن کاملti - microalloyed steel, quenched from hot forging temperature
the aim of the paper presented here is to develop the ti - micralloyed steel in otrer to oprtmize the mechanical properties after direct quenching from hot forging temperature. for this purpose, seven melts containing various amounts of titanium were prepared and cast in metal and sand molds. from the ingots, cast in metal mould, tractor links were produced by hot forging. the produced links we...
متن کاملOptimization of Hot Workability in Ti-IF Steel by Using the Processing Map
Processing map for hot working of Ti-IF steel has been developed in the temperature range of 750 to 1100 °C and strain rate of 0.01 to 100 s-1. This map in the austenite region exhibits a single domain with a peak efficiency of 45% occurring at 1025 °C and strain rate of 0.02 s-1. The domain extends over the temperature range of 1000 to 1100 °C and strain rate range of 0.01 to 1 s-1. The true s...
متن کاملDetermining the Hot Deformation Temperature Range of Medium Carbon Ni-Cr-Mo Low Alloy Steels using Hot Tensile and Hot Torsion Tests
The aim of this study was to investigate the suitable temperature range for hot deformation of three medium carbon Ni-Cr-Mo low alloy steels by hot tensile and hot torsion tests. Hot tensile tests were carried out in the te,prature range of 850-1150°C at a constant strain rate of 0.1 s-1 until fracture. Then, the tensile flow behavior, hot ductility and microstructural evolution of the steels w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2020
ISSN: 2075-4701
DOI: 10.3390/met10030334