منابع مشابه
Texture Evolution in Low Carbon Steel Fabricated by Multi-directional Forging of the Martensite Starting Structuree
It has been clarified that deformation and annealing of martensite starting structure can produce ultrafine-grained structure in low carbon steel. This study aims to investigate the texture evolution and mechanical properties of samples with martensite structure deformed by two different forging processes. The martensitic steel samples were forged by plane strain compression and multi-directio...
متن کاملModeling of Cracks Presence in Steel after Hot Rolling
The optimal material processing in steel industry is difficult because of the multi-constituent and multiphase character of the commercial steels, variety of the possible processing paths, and plant specific equipment characteristics. This paper shows implementation of the genetic programming approach for crack presence modeling after rolling. The data (110 samples covering 7 different steel gr...
متن کاملCase Study: Temperature Control of Hot Rolling Steel
In this case study we discuss a simple control system used for obtaining a desirable downstream surface temperature inside a hot rolling steel sheet, presented by Bao Steel in the HK Study Group with Industry, held at the City University of Hong Kong, July 2002.
متن کاملGenetic Algorithms in Hot Steel Rolling for Scale Defect Prediction
Scale defects are common surface defects in hot steel rolling. The modelling of such defects is problematic and their causes are not straightforward. In this study, we investigated genetic algorithms in search for a mathematical solution to scale formation. For this research, a high-dimensional data set from hot steel rolling process was gathered. The synchronisation of the variables as well as...
متن کاملMetallurgically Consistent Determination of Steel Hot Strength Using Process Data from Hot Strip Mill Rolling
It is not rare to observe an inverse relationship between hot strength determined from rolling load of the finishing stands of the hot strip mill and strain. This situation was already described in the literature and is explained by the use of inverse rolling load models that assumes sticking friction in the determination of hot strength. The aim of this work was to show that this “work softeni...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1966
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.52.8_1171