Hot pressing of Yb:Y2O3 laser ceramics with LiF sintering aid

Comparison of Creep Behavior in Alumina Based Ceramics Densified by Spark Plasma Sintering and Hot Pressing

Spark plasma sintering (SPS) method, as plasma activated sintering, is a method applicable for rapid sintering of metals and ceramics. Owing to the advantage of rapid heating, the alumina ceramics obtained by SPS have a grain size and density comparable to those of hot pressed ones. The increase of densification rate may be related to some difference in ion transport characteristics. This study...

Direct Laser Sintering of Ceramics

For more than one decade layer manufacturing technologies assist the development of new products. Due to a layer-wise build-up of a three-dimensional geometry, nearly every complex design is producible in a short period of time. Selective Laser Sintering is a powderbased technique to produce plastic prototypes (Rapid Prototyping) or metal mould inserts (Rapid Tooling). The laser sintering of ce...

Hot pressing of nanocrystalline TiO2 (anatase) ceramics with controlled microstructure

comparison of creep behavior in alumina based ceramics densified by spark plasma sintering and hot pressing

spark plasma sintering (sps) method, as plasma activated sintering, is a method applicable for rapid sintering of metals and ceramics. owing to the advantage of rapid heating, the alumina ceramics obtained by sps have a grain size and density comparable to those of hot pressed ones. the increase of densification rate may be related to some difference in ion transport characteristics. this study...

Direct Selective Laser Sintering and Containerless Hot Isostatic Pressing for High Performance Metal Components

A novel net shape manufacturing method known as SLSIHIP that combines the strengths of selective laser sintering (SLS) and hot isostatic pressing (HIP) is presented. Direct selective laser sintering is a rapid manufacturing technique that can produce high density metal components of complex geometry with an integral, gas impermeable skin. These components can then be directly post-processed to ...