Hot-Pressing of Titanium Diboride with Binder Metals
نویسندگان
چکیده
منابع مشابه
Argon-shielded hot pressing of titanium alloy (Ti6Al4V) powders.
The paper presents the method of the argon - shielded hot pressing of titanium alloy (Ti6A14V) powder (used in medical industry). The powders produced in the GA (gas atomization) process and in the HDH (hydride - dehydride) process were used in the experiments. A pressing process was conducted at a temperature of 800-850 degrees C for different lengths of time. An unoxidized sintered material, ...
متن کاملMaterial Properties of Titanium Diboride
The physical, mechanical, and thermal properties of polycrystalline TiB2 are examined with an emphasis on the significant dependence of the properties on the density and grain size of the material specimens. Using trend analysis, property relations, and interpolation methods, a coherent set of trend values for the properties of polycrystalline TiB2 is determined for a mass fraction of TiB2 ⩾ 98...
متن کاملHigh-strength zirconium diboride-based ceramic composites consolidated by low-temperature hot pressing.
Two compositions of ZrB2-based ceramic composites containing Si3N4, Al2O3 and Y2O3 have been hot-pressed at different temperatures between 1673 and 1773 K for 60 min in vacuum. The densification behavior of the composites was examined during the sintering process. The microstructures of the composites were characterized by scanning electron microscopy, and the crystalline phases were identified...
متن کاملElastic-Stiffness Coefficients of Titanium Diboride
Using resonance ultrasound spectroscopy, we measured the monocrystal elastic-stiffness coefficients, the Voigt C ij, of TiB2. With hexagonal symmetry, TiB2 exhibits five independent C ij: C 11, C 33, C 44, C 12, C 13. Using Voigt-Reuss-Hill averaging, we converted these monocrystal values to quasiisotropic (polycrystal) elastic stiffnesses. Briefly, we comment on effects of voids. From the C ij...
متن کاملTitanium diboride ceramics for solar thermal absorbers
Titanium diboride (TiB2) is a low-density refractory material belonging to the family of ultra-high temperature ceramics (UHTCs). This paper reports on the production and microstructural and optical characterization of nearly fully dense TiB2, with particular interest to its potential utilization as novel thermal solar absorber. Monolithic bulk samples are produced starting from elemental react...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Association, Japan
سال: 1966
ISSN: 0009-0255,1884-2127
DOI: 10.2109/jcersj1950.74.853_295