Hot hydrostatic extrusion of Ti/Cu-alloy composite materials.
نویسندگان
چکیده
منابع مشابه
Effect of Particle Volume Fraction on the Tensile Properties of Composite Al6061/SiC Materials by Hot Extrusion
In the present study the effect of phase volume fraction on the reinforcement of microstructure and tensile properties of composite extrusion process Al6061/SiC has been studied. For this purpose, the base alloy Al6061 using pure aluminum ingots, silicon, of Al-50% Mg, Al-10% Cr and a thin copper rod was prepared. Next, the composite Al6061/5% SiC, Al6061/10% SiC, Al6061/15% SiC and Al6061/20% ...
متن کاملNANOSTRUCTURED MATERIALS Progress in hydrostatic extrusion of titanium
At the beginning of the present century it has been demonstrated that nanocrystalline titanium (NC-Ti) can be fabricated by hydrostatic extrusion (HE) which is one of the severe plastic deformation method. NC-Ti obtained in such a way exhibited excellent mechanical properties. The influence of HE on the microstructure and mechanical properties of titanium Grade 2 was first analyzed in 2005. In ...
متن کاملDealloying Behaviours of an Equiatomic TiCu Alloy
The crystalline Ti50Cu50 ribbon was prepared by annealing its amorphous counterpart at 773K, 84K higher than its crystallization temperature. An equiatomic TiCu intermetallic phase dominated in the matrix coexisting with trace Ti2Cu phase segregated on the grain boundary. A bi-continuous nanoporous copper from tenths of nanometers to hundredths of nanometers was obtained after dealloying the cr...
متن کاملDislocation Substructure Evolution during Hydrostatic Extrusion of Al Mg Si Alloy
Hydrostatic extrusion is a technique which allows to produce rods with ultra ne grains and unexpectedly enhanced mechanical properties caused by grain re nement. However, the mechanism of such a re nement is not fully understood at this stage. 6xxx aluminium alloys series are usually processed by extrusion. In this study, commercial 6082 aluminium alloy was extruded at ambient temperature in a ...
متن کاملHot Melt Extrusion Technique
Various approaches have been adopted to address this including preparation of solid dispersions and solid solutions. Hot-melt extrusion is an efficient technology for producing solid molecular dispersions with considerable advantages over solvent-based processes such as spray drying and co-precipitation. Hot-melt extrusion has been demonstrated to provide sustained, modified, and targeted drug ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1988
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.37.107