Hot Forging and Hot Pressing of AlSi Powder Compared to Conventional Powder Metallurgy Route
نویسندگان
چکیده
منابع مشابه
Synthesis and characterisation of hot extruded aluminium-based MMC developed by powder metallurgy route
Background: Improvement of the mechanical and tribological properties due to extrusion can be attributed to the improved density and excellent bond strength due to high compressive stress. Methods: To avoid the product defects mathematically contoured cosine profiled die was used for the thermomechanical treatment. Improvement of mechanical characterization like density, hardness, compression t...
متن کاملEffects of Temperature and Pressure of Hot Isostatic Pressing on the Grain Structure of Powder Metallurgy Superalloy
The microstructure with homogeneously distributed grains and less prior particle boundary (PPB) precipitates is always desired for powder metallurgy superalloys after hot isostatic pressing (HIPping). In this work, we studied the effects of HIPping parameters, temperature and pressure on the grain structure in PM superalloy FGH96, by means of scanning electron microscope (SEM), electron backsca...
متن کاملHot Deformation Behavior and Pulse Current Auxiliary Isothermal Forging of Hot Pressing Sintering TiAl Based Alloys
This paper focuses on the fabrication of as-forged Ti46.5Al2Cr1.8Nb-(W, B) alloy via pulse current auxiliary isothermal forging (PCIF). The starting material composed of near gamma (NG) microstructure was fabricated by adopting pre-alloyed powders via hot pressing sintering (HPS) at 1300 °C. Isothermal compression tests were conducted at a strain rate range of 0.001-0.1 s-1 and a temperature ra...
متن کاملHigh Porosity Metallic Glass Foam: A Powder Metallurgy Route
A powder metallurgy route to the fabrication of metallic glass foam is introduced. The method involves consolidating metallic glass powder blended with blowing agent particulates to produce expandable precursors, capable of yielding foams with porosities as high as 86%. The foams are found to inherit the strength of the parent metallic glass, and to be able to deform heavily toward full densifi...
متن کاملProcessing of Diamond Composites for Cutting Tools by Powder Metallurgy and Rotary Forging
This paper shows the manufacture route of the bronze 4% weight diamond composite rope for direct application as diamond wires, and linear saws in the slabbing and cutting of dimension stones. This route consists of powder mix compaction, sintering and rotary forging techniques. Tensile tests were performed, reaching an ultimate tensile strength of 230MPa for the diameter of ∅=1.84mm. Scanning e...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Sciences and Applications
سال: 2011
ISSN: 2153-117X,2153-1188
DOI: 10.4236/msa.2011.28152