Hot Corrosion of Pure Nickel Induced by Na<SUB>2</SUB>SO<SUB>4</SUB>-NaCl Mixtures
نویسندگان
چکیده
منابع مشابه
Effect of Different Welding Processes on Electrochemical and Corrosion Behavior of Pure Nickel in 1 M NaCl Solution
A plasma arc welding (PAW)-tungsten inert gas (TIG) hybrid welding process is proposed to weld pure nickel. In PAW-TIG welding, the arc of the PAW was first to be ignited, then TIG was ignited, while in PAW welding, only the PAW arc was launched. This paper investigated the effect of different welding processes on electrochemical and corrosion performance of between a pure nickel joint and a ba...
متن کاملInhibition of Copper Corrosion by Ethanolamine in 100 ppm NaCl
We study copper corrosion inhibition by ethanolamine (ETA)with (0, 0.2 ,0.3,0.4,0.5) vol.% concentrations in 100 ppm NaCl solution. This work is carried out by potentiodynamic measurements and Electrochemical Impedance Spectroscopy (EIS). The substrates' surface morphologies are examined by Scanning Electron Microscopy (...
متن کاملHot Corrosion of Ti-Based Intermetallics with Coatings in NaCl+ (Na,K)2SO4 Melts at 750oC
In this study, the hot corrosion of TiAl, TiAlNb, and Ti3AlNb intermetallics with or without enamel coating and sputtered TiAlCr coating in (Na, K)2SO4 + NaCl melts at 750oC is investigated. The interfacial reaction between enamel and those alloys during hot corrosion has also been evaluated. The results indicate that severe corrosion of bare alloys occurs due to the self catalysis chlorination...
متن کاملinhibition of copper corrosion by ethanolamine in 100 ppm nacl
we study copper corrosion inhibition by ethanolamine (eta)with (0, 0.2 ,0.3,0.4,0.5) vol.% concentrations in 100 ppm nacl solution. this work is carried out by potentiodynamic measurements and electrochemical impedance spectroscopy (eis). the substrates' surface morphologies are examined by scanning electron microscopy (sem). etais characterized by nmr spectra of eta1h and 13c and fourier ...
متن کاملHot Corrosion in Gas Turbines
DURING COMBUSTION in the gas turbine, sulfur from the fuel reacts with sodium chloride from ingested air at elevated temperatures to form sodium sulfate. The sodium sulfate then deposits on the hot-section components, such as nozzle guide vanes and rotor blades, resulting in accelerated oxidation (or sulfidation) attack. This is commonly referred to as “hot corrosion.” Sulfur in the fuel is gen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1985
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.49.4_267