Hot Consolidation of Partially Amorphous Cu-Ti Based Alloy: a Comparison Between Hot Extrusion and Hot Compaction by Sintering
نویسندگان
چکیده
منابع مشابه
Texture Development in YBa 2 Cu 30 , by Hot Extrusion and Hot - Pressing
case of 18 kN, a considerable portion of the particles are mechanically broken. The structure is condensed nearly without cavities. It might be useful to prepare pellets of high density, as the diffusion coefficient of tritium in Li,SiO, or Li4Si04 is on the order of 2 magnitudes higher than in the other lithium compounds.’ Li2Si03.nH20 is X-ray amorphous. ‘ A considerable portion of the powder...
متن کاملComparison of Creep Behavior in Alumina Based Ceramics Densified by Spark Plasma Sintering and Hot Pressing
Spark plasma sintering (SPS) method, as plasma activated sintering, is a method applicable for rapid sintering of metals and ceramics. Owing to the advantage of rapid heating, the alumina ceramics obtained by SPS have a grain size and density comparable to those of hot pressed ones. The increase of densification rate may be related to some difference in ion transport characteristics. This study...
متن کاملMicrostructural Evaluation of Ti-6AL-4V Alloy during Hot Deformation
Among the titanium alloys, Ti-6Al-4V is the most widely used. In the present work, the uniaxial hot compressive behavior of Ti-6Al-4V has been investigated under constant strain rates. A series of dilatometery experiments were carried out to determine the transformation temperatures at different cooling rates. Specimens were homogenized at 1050 °C for 10 minutes followed by fast cooling to dif...
متن کاملMicrostructural Evaluation of Ti-6AL-4V Alloy during Hot Deformation
Among the titanium alloys, Ti-6Al-4V is the most widely used. In the present work, the uniaxial hot compressive behavior of Ti-6Al-4V has been investigated under constant strain rates. A series of dilatometery experiments were carried out to determine the transformation temperatures at different cooling rates. Specimens were homogenized at 1050 °C for 10 minutes followed by fast cooling to dif...
متن کاملHot-Melt Extrusion Technique: A Review
Hot-melt extrusion is one of the most widely applied processing technologies in the plastic, rubber and food industry. Today this technology has found its place in the array of pharmaceutical manufacturing operations. Melt extrusion process are currently applied in the pharmaceutical field for the manufacture of a variety of dosage forms and formulations such as granules, pellets, tablets, supp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2015
ISSN: 1516-1439
DOI: 10.1590/1516-1439.277114