Horizontally Solidified Al–3 wt%Cu–(0.5 wt%Mg) Alloys: Tailoring Thermal Parameters, Microstructure, Microhardness, and Corrosion Behavior
نویسندگان
چکیده
منابع مشابه
Microstructure and corrosion behavior of binary titanium alloys with beta-stabilizing elements.
Binary titanium alloys with the beta-stabilizing elements of Co, Cr, Cu, Fe, Mn and Pd (up to 30%) and Ag (up to 45%) were examined through metallographic observation and X-ray diffractometry to determine whether beta phases that are advantageous for dental use could be retained. Corrosion behavior was also investigated electrochemically and discussed thermodynamically. Some cast alloys with Co...
متن کاملMicrostructure, mechanical property, corrosion behavior, and in vitro biocompatibility of Zr-Mo alloys.
In this study, the microstructure, mechanical properties, corrosion behaviors, and in vitro biocompatibility of Zr-Mo alloys as a function of Mo content after solution treatment were systemically investigated to assess their potential use in biomedical application. The experimental results indicated that Zr-1Mo alloy mainly consisted of an acicular structure of α' phase, while ω phase formed in...
متن کاملEffect of Nb on the Microstructure, Mechanical Properties, Corrosion Behavior, and Cytotoxicity of Ti-Nb Alloys
In this paper, the effects of Nb addition (5-20 wt %) on the microstructure, mechanical properties, corrosion behavior, and cytotoxicity of Ti-Nb alloys were investigated with the aim of understanding the relationship between phase/microstructure and various properties of Ti-xNb alloys. Phase/microstructure was analyzed using X-ray diffraction (XRD), SEM, and TEM. The results indicated that the...
متن کاملMicrostructure and Corrosion Behavior of Laser Welded Magnesium Alloys with Silver Nanoparticles
Magnesium alloys have gained increased attention in recent years in automotive, electronics, and medical industry. This because of magnesium alloys have better properties than aluminum alloys and steels in respects of their low density and high strength to weight ratio. However, the main problems of magnesium alloy welding are the crack formation and the appearance of porosity during the solidi...
متن کاملEffect of Microstructure Factors on Stress Corrosion Behavior of Mg-xSn Alloys (x=2, 5, 8mass%)
The effect of microstructure on the stress corrosion behavior of Mg–Sn alloys was investigated using a bent-beam method. The effects of an Mg2Sn phase and Sn in the matrix on stress corrosion were investigated. Mg2Sn phase mainly formed at the grain boundary. The volume fraction of the Mg2Sn phase increased with increasing Sn content, and the morphology of Mg2Sn changed from spherical to a semi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Metallurgica Sinica (English Letters)
سال: 2018
ISSN: 1006-7191,2194-1289
DOI: 10.1007/s40195-018-0852-z