Horizontal Cut-and-Fill Method is Adopted at Toyoha Mine
نویسندگان
چکیده
منابع مشابه
Geotechnical Properties of Mine Fill
Mine fill is the material placed underground to fill the voids created by mining excavations. It provides overall large scale ground stabilization while allowing localized pillar recovery. In addition to providing a working floor or back, mine fill has the potential to reduce subsidence and minimize dilution. Mine fill is essential to cut and fill, benching and sublevel stoping mining methods. ...
متن کاملA new classification system for evaluation and prediction of unplanned dilution in cut-and-fill stoping method
Production planning in mineral exploitation should be undertaken to maximize exploited ore at a minimum unplanned dilution. Unplanned dilution reduction is among the ways to enhance the quality of products, and hence, reduce the associated costs, resulting in a higher profit. In this way, firstly, all the parameters contributing to unplanned dilution in underground stopes and specifically the c...
متن کاملReliability analysis and design of backfill in a cut-and-fill mining method
In underground mining, hydraulic backfill materials, such as waste tailings, river sand, and cement, are often used to fill underground mined stopes. In cut-and-fill mining methods with blasthole stoping and delayed backfill, after extraction of adjacent pillars that contain economic minerals, the backfill is often subject to exposure of free standing on at least one side. A key concern for min...
متن کاملApplication of cut set method to reliability evaluation of mine ventilation networks
Providing a fresh and cool airflow in underground mines is one of the main concerns during mining. Destruction of support systems, the presence of undesirable objects in the airway and distortion of airflow are the parameters involved that would result in pressure loss, which would affect the ventilation network. There are a lot of research works about the ventilation network planning that cons...
متن کاملMicroleakage of Bulk-Fill Composites at Two Different Time Points
Objectives: Microleakage is the main concern in composite restorations. This study aimed to compare the microleakage of two bulk-fill and one conventional composite at two different time points. Methods: Class II cavities were prepared in 60 premolar teeth and divided into six groups of 20. Groups 1 and 4 were incrementally filled with Grandio composite. Groups 2 and 5 were filled with X-tra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Mining and Metallurgical Institute of Japan
سال: 1957
ISSN: 0369-4194,2185-6729
DOI: 10.2473/shigentosozai1953.73.832_732