Hollow Cylinder Simulation Experiments of Galleries in Boom Clay Formation
نویسندگان
چکیده
منابع مشابه
Hollow cylinder simulation experiments of galleries in Boom Clay formation
In the context of nuclear waste disposal in clay formations, laboratory experiments were performed to study at reduced scale the Excavation Damaged Zone (EDZ) induced by the construction of galleries in the Boom Clay formation. For this purpose, thick-walled hollow cylindrical samples were subjected (after recovery of in-situ stress conditions) to a decrease of the inner confining pressure aimi...
متن کاملDynamic Simulation of the Harvester Boom Cylinder
Based on the complete dynamic calculation method, the layout, force, and strength of harvester boom cylinders were designed and calculated. Closed simulations for the determination of the dynamic responses of the harvester boom during luffing motion considering the cylinder drive system and luffing angle position control have been realized. Using the ADAMS mechanical system dynamics analysis so...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Kinetic Simulation of Air Flow Around Hollow Cylinder Flare Configuration
Kinetic approach was used to study the shock wave/boundary layer interaction in diatomic gases and gas mixtures. The effect of non-equilibrium processes on the steady state solution was studied.
متن کاملOn the Thermal Consolidation of Boom Clay
When a mass of saturated clay is heated, as in the case of host soils surrounding nuclear waste disposals at great depth, the thermal expansion of the constituents generates excess pore pressures. The mass of clay is submitted to gradients of pore pressure and temperature, to hydraulic and thermal flows, and to changes in its mechanical properties. In this work, some of these aspects were exper...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Rock Mechanics and Rock Engineering
سال: 2013
ISSN: 0723-2632,1434-453X
DOI: 10.1007/s00603-012-0332-0