Holland W., Beall G.: Glass-ceramic technology,"The American Ceramic Society", Westerville, OH, USA, 2002, pp. 372
نویسندگان
چکیده
منابع مشابه
Lithium Disilicate Glass-Ceramic
ceramic on light transmission of light-emitting diode (LED) and quartz-tungsten-halogen units (QTH) were evaluated. Ceramic IPS e.max CAD shades A1, A2, A3, A3.5, high (HT) and low (LT) translucency were cut (1, 2, 3, 4 and 5 mm). Light sources emission spectra were determined. Light intensity incident and transmitted through each ceramic sample was measured to determine light transmission perc...
متن کاملGranite Based Glass-Ceramic Materials
In this study, production possibility of glass and glass-ceramic produced from granite was investigated. The composition of granite based glass bath mixture was 50 wt% granite, 25 wt% dolomite and 25 wt% sodium carbonate. Composition that was grounded and mixed in a ball mill for 2 h was melted at 1500 ◦C for 1 h. Glass samples were heat treated for crystallization to produce glass-ceramic mate...
متن کاملResin Cement to Glass Ceramic
silane to improve the adhesion of phosphate monomer-based (MDP) resin cement to glass ceramic. Resin and feldspathic ceramic blocks (n=48, n=6 for bond test, n=2 for microscopy) were randomly divided into 6 groups and subject to surface treatments: G1: Hydrofluoric acid (HF) 9.6% for 20 s + Silane + MDP resin cement (Panavia F); G2: HF 9.6% for 20 s + Silane + Heat Treatment (oven) + Panavia F;...
متن کاملZirconia Toughening of Glass-ceramic Materials
A ceramic material suitable for packaging of large scale integrated circuit is produced by the process of forming a mixture of a powdered glass ceramic material which is a glassy precursor to cordierite ceramic material, formed by the steps which are as follows: a. Mix tetragonal phase material selected from the group consisting of zirconia or hafnia powder con taining a stabilizing oxide compo...
متن کاملWear Properties of Gabbro Based Glass and Glass-Ceramic Materials
Glass-ceramic materials were developed from gabbro including MgO and Al2O3 additives. Heat treatments for phase transformation from glassy matrix to glass-ceramic were carried out at 1000 ◦C for 3 h. X-ray di raction studies conducted on the glass-ceramic samples revealed that the phases formed in the glass-ceramics were cordierite, anorthite, diopsitic augite, forsterite and andesine. Glass an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science of Sintering
سال: 2004
ISSN: 0350-820X,1820-7413
DOI: 10.2298/sos0403216u