High‐Performance and Industrially Viable Nanostructured SiO x Layers for Interface Passivation in Thin Film Solar Cells

نویسندگان

چکیده

Ultrathin Solar Cells In article number 2000534, José M. V. Cunha and co-workers applied two SiOx passivation architectures in ultrathin CIGS solar cells. Both approaches resulted devices with a higher performance compared to reference non-passivated device. The potential use as material, deposited by high throughput industrial technique based microelectronics processing, yields promising results towards high-performance low-cost

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Thin-film Silicon Solar Cells

The simplest semiconductor junction that is used in solar cells for separating photogenerated charge carriers is the p-n junction, an interface between the p-type region and ntype region of one semiconductor. Therefore, the basic semiconductor property of a material, the possibility to vary its conductivity by doping, has to be demonstrated first before the material can be considered as a suita...

متن کامل

Application of Au@SiO2 Plasmonic Nanoparticles at Interface of TiO2 Mesoporous Layers in Perovskite Solar Cells

To investigate the plasmonic effect in perovskite solar cells, the effect of depositing Au@SiO2 nanoparticles on the top and the bottom of mesoporous TiO2 layers was studied. First, Au@SiO2 nanoparticles were synthesized. The particles were then deposited at the different interfaces of mesoporous TiO2 layers. Although the two structures show approximately similar optical absorption, only cells ...

متن کامل

Nanosphere lithography of nanostructured silver films on thin-film silicon solar cells for light trapping

Sparse arrays of evaporated silver nanodisks were fabricated with nanosphere lithography (NSL) on glass substrates and on hydrogenated nanocrystalline silicon solar cells. The optical transmittance spectra for arrays on glass vary substantially with film thickness, and were reasonably consistent with previous work. The quantum efficiency spectra of hydrogenated nanocrystalline silicon solar cel...

متن کامل

Comparison of Techniques for Strain Measurements in CuInSe2 Absorber Layers of Thin-film Solar Cells

1. Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Hahn-Meitner-Platz 1, 14109 Berlin, Germany 2. Freie Universitaet Berlin, Institute of Geological Sciences, Malteserstr. 74-100, 12249 Berlin, Germany 3. Department of Materials, University of Oxford, Parks Road, Oxford OX1 3PH, U.K. 4. European Synchrotron Radiation Facility, BP 220, Grenoble Cedex, France 5. Federal Institute for M...

متن کامل

Optimization of Annealing Process for Totally Printable High-current Superstrate CuInS2 Thin-Film Solar Cells

Planar superstrate CuInS2 (CIS) solar cell devices are fabricated using totally solution-processed deposition methods. A titanium dioxide blocking layer and an In2S3 buffer layer are deposited by the spray pyrolysis method. A CIS2 absorber layer is deposited by the spin coating method using CIS ink prepared by a 1-butylamine solvent-based solution at room temperature. To obtain optimum annealin...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Solar RRL

سال: 2021

ISSN: ['2367-198X']

DOI: https://doi.org/10.1002/solr.202170036