Highly parallel scanning tunneling microscope based hydrogen depassivation lithography

Simulating Scanning Tunneling Microscope

Scanning tunneling microscope for magneto-optical imaging

• A submitted manuscript is the author's version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version ...

Reproducible Fabrication of Scanning Tunneling Microscope Tips

Reproducible fabrication of Scanning Tunneling Microscope tips is carried out following an electrochemical procedure widely reported. Tips are made from 0.5 diameter tungsten wire. Controlling fabrication parameters (immersion in the electrochemical solution, current-voltage ranges, duration of the process, among others) we achieve aspect ratios of 0.68 and tip radii of 330 nm in the best case....

Theory of the scanning tunneling microscope.

We present a theory for tunneling between a real surface and a model probe tip, applicable to the recently developed "scanning tunneling microscope." The tunneling current is found to be proportional to the local density of states of the surface, at the position of the tip. The effective lateral resolution is related to the tip radius R and the vacuum gap distance d approximately as [(2 A)(R +d...

Active mechanical noise cancellation scanning tunneling microscope.

We present the design and performance of an active mechanical noise cancellation scanning tunneling microscope (STM). This system features two key parts: a "twin-tip" scanner and an active mechanical noise cancellation algorithm. The twin-tip scanner functions as two independent STMs which share nearly the same mechanical transfer function, allowing both STMs to sense nearly identical backgroun...