Highly efficient nanofocusing based on a T-shape micro-slit surrounded with multi-slits
نویسندگان
چکیده
منابع مشابه
Ultrasonic Lens Based on a Subwavelength Slit Surrounded by Grooves
The lensing capabilities of a single subwavelength slit surrounded by a finite array of grooves milled into a brass plate is presented. The modulation of the beam intensity of this ultrasonic lens can be adjusted by varying the groove depth. Numerical simulations as well as experimental validations at 290 kHz are shown. The experimental results are in good agreement with the numerical simulatio...
متن کاملA Highly Efficient On-chip 3D Plasmonic Nanofocusing Structure
We demonstrate and analyze a highly efficient on-chip 3D metal-insulator-metal (MIM) nanofocusing structure. Here, we show the in-depth theoretical design, analysis and discussion to provide a detailed picture of the highly efficient, on-chip nanofocusing process which is linearly tapered in 3D.
متن کاملEnhanced electromagnetic transmission through a slit surrounded by rectangular grooves
Taylor & Francis makes every effort to ensure the accuracy of all the information (the “Content”) contained in the publications on our platform. However, Taylor & Francis, our agents, and our licensors make no representations or warranties whatsoever as to the accuracy, completeness, or suitability for any purpose of the Content. Any opinions and views expressed in this publication are the opin...
متن کاملGas Mixing Simulation in a T-Shape Micro Channel Using The DSMC Method
Gas mixing in a T-shape micro mixer has been simulated using the Direct Simulation Monte Carlo (DSMC) method. It is considered that the adequate mixing occurs when the mass composition of the species, CO or N2, deviates below 1 % from their equilibrium composition. The mixing coefficient is defined as the ratio of the mixing length to the main channel’s height. As the inlet Kn increases, while ...
متن کاملThe Micro Slit Gas Detector
We describe the first tests with a new proportional gas detector. Its geometry consists in slits opened in a copper metallized kapton foil with 30 μm anode strips suspended in these openings. In this way the multiplication process is similar to a standard MSGC. The fundamental difference is the absence of an insulating substrate around the anode. Also the material budget is significantly reduce...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2012
ISSN: 1094-4087
DOI: 10.1364/oe.20.017734