High‐Energy SWCNT Cathode for Aqueous Al‐Ion Battery Boosted by Multi‐Ion Intercalation Chemistry (Adv. Energy Mater. 39/2021)
نویسندگان
چکیده
Aqueous Al-Ion Batteries In article number 2101514, Xinhua Liu, Dennis Y. C. Leung, and co-workers propose a high-performance aqueous Al-ion battery with SWCNT cathode an aluminum foil anode. A water-in-salt electrolyte is used to provide multiple electrochemical species so that AlCl4− ions can be extracted Al3+ inserted from/into the during discharging, providing high-energy-density output. This low-cost technology expected utilized for large-scale renewable energy storage systems.
منابع مشابه
A new cathode material for super-valent battery based on aluminium ion intercalation and deintercalation
Due to their small footprint and flexible siting, rechargeable batteries are attractive for energy storage systems. A super-valent battery based on aluminium ion intercalation and deintercalation is proposed in this work with VO2 as cathode and high-purity Al foil as anode. First-principles calculations are also employed to theoretically investigate the crystal structure change and the insertio...
متن کاملSpinel LiNi0.5Mn1.5O4 Cathode for High-Energy Aqueous Lithium-Ion Batteries
DOI: 10.1002/aenm.201600922 considering the overpotential during charge process. Recently, Yamada et al. reported that LiNi0.5Mn1.5O4 can only reversibly provide capacity of ≈75 mA h g−1 in the more concentrated hydrate melt electrolytes (≈30 mol kg−1), which is 50% of theoretical capacity.[14] The oxygen evolution side reaction also largely significantly reduce the coulombic efficiency. In add...
متن کاملIntercalation-Induced Stress and Heat Generation within Single Lithium-Ion Battery Cathode Particles
Intercalation-induced stress and heat generation inside Li-ion battery cathode LiMn2O4 particles under potentiodynamic control are simulated in this paper. We combined analyses of transport and kinetics in determining resulting stresses, which arise from concentration gradients in cathode particles, and heat generation. Two peaks in boundary reaction flux, and resulting stresses, were determine...
متن کاملElectrode Materials for Lithium Ion Batteries: A Review
Electrochemical energy storage systems are categorized into different types, according to their mechanisms, including capacitors, supercapacitors, batteries and fuel cells. All battery systems include some main components: anode, cathode, an aqueous/non-aqueous electrolyte and a membrane that separates anode and cathode while being permeable to ions. Being one of the key parts of any new electr...
متن کاملGraphene Scroll-Coated α-MnO2 Nanowires as High-Performance Cathode Materials for Aqueous Zn-Ion Battery.
The development of manganese dioxide as the cathode for aqueous Zn-ion battery (ZIB) is limited by the rapid capacity fading and material dissolution. Here, a highly reversible aqueous ZIB using graphene scroll-coated α-MnO2 as the cathode is proposed. The graphene scroll is uniformly coated on the MnO2 nanowire with an average width of 5 nm, which increases the electrical conductivity of the M...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Energy Materials
سال: 2021
ISSN: ['1614-6832', '1614-6840']
DOI: https://doi.org/10.1002/aenm.202170155