High wear resistant deep drawing tools made of coated polymers
نویسندگان
چکیده
منابع مشابه
Wear behavior of ZrAlN coated cutting tools during turning
In this study we explore the cutting performance of ZrAlN coatings. WC:Co cutting inserts coated by cathodic arc evaporated Zr1-xAlxN coatings with x between 0 and 0.83 were tested in a longitudinal turning operation. The progress of wear was studied by optical microscopy and the used inserts were studied by electron microscopy. The cutting performance was correlated to the coating composition ...
متن کاملAbrasive Wear between Rough Surfaces in Deep Drawing
A recent development in sheet metal forming industry is the application of tailored blanks: blanks prepared from separate pieces of sheet material, welded together prior to the forming process. The pieces of sheet material can have different properties, enabling weight reduction of components, corrosion resistance using cathodic protection or the possibility to create local weak spots, resultin...
متن کاملWear resistant solid lubricant coating made from PTFE and epoxy
A composite coating of polytetrafluoroethylene and epoxy shows 100 · improvements in wear resistance as compared to either of its constituents alone and reduced friction coefficient under testing on a pin-on-disk tribometer. This coating is made by impregnating an expanded PTFE film with epoxy, which provides three unique functions: (1) the epoxy compartmentalizes the PTFE nodes, which is belie...
متن کاملDeep Drawing of High-Strength Tailored Blanks by Using Tailored Tools
In most forming processes based on tailored blanks, the tool material remains the same as that of sheet metal blanks without tailored properties. A novel concept of lightweight construction for deep drawing tools is presented in this work to improve the forming behavior of tailored blanks. The investigations presented here deal with the forming of tailored blanks of dissimilar strengths using t...
متن کاملextra high limiting drawing ratio (ldr=9) cylindrical deep drawing based on finite element and experiment
deep drawing of cylindrical shapes with high limiting drawing ratio (ldr) values is relatively difficult. annealing is a further operation, which in turn adds costs and consumes significantly time to the forming process. in the present work, cylindrical cups from brass sheet were made with only limited anneal during few steps, but having ldr of 9 that is about 2 times higher than previous works...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: CIRP Annals
سال: 2011
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2011.03.149