High-Temperature Zone-Drawing for Nylon 6 Fibers.

A Study on the Kinetic and Thermodynamic Parameters of Different Acid Dyes on Nylon 6 Fibers

Modification of Nylon 6 , 6 1

Nylon 6, 6 is regarded as tough and ductile materials since it exhibit high tensile elongation to break and high drop weight impact strengths. However, under conditions of stress concentration such as in the presence of sharp notches or cracks, polyamides exhibit brittle failure. This property, evaluated as notched Izod or Charpy impact tests, indicates that unmodified polyamides exhibit relati...

Drying kinetics of granular Nylon-6

In this study, the drying kinetics of granular nylon-6 has been investigated. Single particle drying experiments were carried out in a magnetic suspension balance (MSB) using dry air as drying agent. The comparison of measured and simulated data using Vrentas-Duda diffusion model shows a satisfactory prediction of mean particle moisture content and drying rates. The Flory-Huggins model predicts...

Effect of Cellulose Fiber Reinforcement on the Temperature Dependent Mechanical Performance of Nylon 6

In order to quantify the effect of temperature on the mechanical properties of pure nylon 6 and its composite with cellulose fibers (containing 25 wt% cellulose fibers), the materials were sampled and tested at three representative temperatures of 256, 296, and 336 K. Flexural and tensile tests were performed and the reductions in mechanical properties were evaluated. The highest reductions wer...

Drawing of Hollow Multilayered All-Polymer Fibers

We present a fluid dynamics model for the drawing of hollow multilayer polymer optical fiber. A newtonian model is considered assuming slender geometries. Hollow core collapse during drawing and layer thickness non-uniformity are investigated as a function of draw temperature, draw ratio, feeding speed, core pressurization and mismatch of material properties in a multilayer.