High-temperature superconducting magnet for use in saturated core FCL
نویسندگان
چکیده
منابع مشابه
Status of High Temperature Superconducting Magnet Development
Since the discovery of high temperature superconductors more than 2 decades ago, there has been interest in their use for future fusion machines. Lack of performance of commercially available materials, however, dampened the initial optimism. However, recent advances in HTS materials, mostly second-generation tapes, open attractive topologies. In addition to reduced cryogenic loads and increase...
متن کاملHigh Temperature Superconducting Magnet Control Actuators for the NGST
Executive Summary In this program, the use of high temperature superconducting monoliths for drivers for actuators was investigated. The properties of commercially available bulk YBCO and BSCCO monoliths were measured, and compared with those obtained in laboratory samples. The monoliths were charged, and the capability of holding field was determined. It was found that the properties of commer...
متن کاملExperimental Investigation of High-Temperature Superconducting Magnet for Maglev
The use of high-temperature superconducting wires (HTS wires) in on-board superconducting magnets for maglev has several advantages such as improvement in the stability of the superconducting magnet, improvement in reliability through simplification of the magnet structure, and decrease in the mass of the superconducting magnet and energy consumed by the on-board cryocooler. To demonstrate the ...
متن کاملA new ring-shape high-temperature superconducting trapped-field magnet
This paper presents a new trapped-field magnet made of second-generation high-temperature superconducting (2G HTS) rings. This so-called ring-shape 2G HTS magnet has the potential to provide much stronger magnetic fields relative to existing permanent magnets. Compared to existing 2G HTS trappedfield magnets, e.g. 2G HTS bulks and stacks, this new ring-shape 2G HTS magnet is more flexible in si...
متن کاملDesign considerations in MgB2-based superconducting coils for use in saturated-core fault current limiters
Saturated-core fault current limiters (FCLs) are devices that have many applications and potential for use within power networks. At a commercial scale, these devices require high H-field magnets to saturate the steel core, which can typically only be achieved through the use of superconducting coils. Here, we present several challenges that arise in the application of superconducting coils in ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2008
ISSN: 1742-6596
DOI: 10.1088/1742-6596/97/1/012294