High Temperature Strength of Constructions (II)
نویسندگان
چکیده
منابع مشابه
Experimental investigation of the strength of glass fiber-reinforced concrete exposed to high temperature
This study investigated the effects of high temperature exposure on the compressive, tensile, and flexural strengths of concrete containing glass fiber. A total of 108 cubic specimens (150 mm × 150 mm × 150 mm), cylindrical specimens (300 mm × 150 mm), and prismatic specimens (500 mm × 150 mm × 150 mm) were prepared for compressive, tensile, and flexural strength testing, respectively. The spec...
متن کاملHigh temperature shear strength of T650-35 / HFPE-II-52 polyimide matrix unidirectional composite
The shear strength of a 4-ply unidirectional composite laminate consisting of carbon fibers (T650-35) and a polyimide matrix (HFPE-II-52) was measured over a temperature range of 25 to 315C. The tests were performed using a Iosipescu test sample, modified to provide a more uniform shear stress distribution across the gauge section and loaded with an Arcan type test fixture. The test specimen de...
متن کاملOn Canonical Constructions. Ii.
In the second paper in this series [2; 3], it was demonstrated that under suitable topological conditions on a space 5 (which are in particular always satisfied for a manifold), the problem of reconstructing S from its group G of homeomorphism onto itself may be reduced to the problem of reconstructing the points of 5 from C7. If 5 can be reconstructed then every automorphism of G is inner, and...
متن کاملHigh-Strength Bainitic Steels
With careful design, mixed microstructures consisting of fine plates of upper bainitic ferrite separated by thin films of stable retained austenite have exhibited impressive combinations of strength and toughness in highsilicon bainitic steels. The silicon suppresses the precipitation of brittle cementite leading to an improvement in toughness. The essential principles governing the optimisatio...
متن کاملInvestigation of influences of alloying elements and sintering temperature on the properties of high strength low alloyed sintered steel
Producing parts with high density and improved mechanical properties is one of the most important aims of powder metallurgy process. There are many factors for attaining modified properties in sintered parts but among them controlling type and quantity of alloying elements and manufacturing parameters such as compacting pressure, sintering temperature are the most effective. In this research, t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1969
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.18.565