HIGH-TEMPERATURE RHEOMETRY OF BLAST FURNACE SYNTHETIC SLAGS DOPED WITH TiO2 AND TiN

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Properties of Cement Pastes Doped with Very High Amounts of Ground Granulated Blast-furnace Slag

In the current work, the properties of cement pastes doped with high amounts of ground granulated blast-furnace slag (HVS) were investigated. Portland cement (PC) was substituted with ground granulated blast-furnace slag (donated as slag) at very high amounts of 85%, 90%, 95% and 100%, by weight. PC paste without any content of slag was used as a reference. Some fresh and hardened properties su...

متن کامل

Blast furnace slags as sorbents of phosphate from water solutions.

The paper is focused on the sorption of phosphorus from aqueous solutions by crystalline and amorphous blast furnace slags. Slag sorption kinetics were measured, adsorption tests were carried out and the effect of acidification on the sorption properties of slags was studied. The kinetic measurements confirmed that the sorption of phosphorus on crystalline as well as amorphous slags can be desc...

متن کامل

Limestone Fillers Cement Based Composites: Effects of Blast Furnace Slags on Fresh and Hardened Properties

Limestone filler is a raw material that is already used in several applications like paints, bricks, bituminous mixtures...etc. Moreover, and particularly in Belgium, classical additions for concrete like fly ashes and granulated blast furnace slags are becoming rare; there is a need for new additions that could have a positive effect on the properties of the fresh and hardened cementitous comp...

متن کامل

Blast Furnace Analysis with Neural Networks

Nowadays blast furnace operation is supervised by extensive measurements and controlled accordingly. Characteristic indications concerning process quality are given by the analysis of the radial temperature profile in the upper part of the furnace. Optimising this temperature distribution would lead to considerable savings of input material. To achieve an optimisation, quantitative relations be...

متن کامل

USE OF PURE AND SULPHUR DOPED TiO2 NANOPARTICLES FOR HIGH TEMPERATURE CATALYTIC DESTRUCTION OF H2S GAS

H2S reduction over Pure and Sulphur doped TiO2 nanoparticles was studied in this work. The parameter was catalytic destruction of H2S gas under high temperature of 450C using fixed bed catalytic system under laboratory conditions. Under these conditions 99.97% reduction was achieved using S-doped TiO2. 2.89% Sulphur was adsorbed on S-doped TiO2 nanoparticles to form Ti(SO4)2. Comparatively, no ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Metallurgy and Foundry Engineering

سال: 2015

ISSN: 1230-2325

DOI: 10.7494/mafe.2015.41.1.17