High-Temperature Plastic Flow in Fine-Grained Ceramics
نویسندگان
چکیده
منابع مشابه
Triple junction diffusion and plastic flow in fine-grained materials
A theoretical model is suggested which describes the yield stress dependence on grain size in fine-grained materials, based upon competition between conventional dislocation slip, grain boundary diffusional creep (Coble creep) and triple junction diffusional creep. In the framework of the model, the contribution of diffusional creep mechanisms to plastic deformation increases with reduction of ...
متن کاملSuperplasticity of a fine-grained Mg–1.5 wt% Gd alloy after severe plastic deformation
The strain rate sensitivity (SRS) of Mg–1.5 wt% Gd processed by conventional extrusion and 2 passes of simple shear extrusion (SSE) was investigated by shear punch testing. Shear punch tests were conducted at initial shear strain rates in the range of 0.003–0.3 s-1 and at temperatures in the range of 573–773 K. A fine-grained microstructure with an average grain size of about 2.5 µm, obtained a...
متن کاملUltra-Fine Grained Dual-Phase Steels
This paper provides an overview on obtaining low-carbon ultra-fine grained dual-phase steels through rapid intercritical annealing of cold-rolled sheet as improved materials for automotive applications. A laboratory processing route was designed that involves cold-rolling of a tempered martensite structure followed by a second tempering step to produce a fine grained aggregate of ferrite and ca...
متن کاملHigh level compilation for fine grained FPGAs
Over the past several years, Field Programmable Gate Arrays (FPGAs) have functioned effectively as specialized processors capable of an order of magnitude improved performance over workstations a t a fraction of the cost. I t is widely recognized, however, that for FPGAs to gain acceptance in the software community as algorithm accelerator$, tools to create hardware realizations of those algori...
متن کاملPreparation of Ultra Fine Grained Magnesia Ceramics and the Temperature and Porosity Dependence of Their Fracture Behaviour
Fine grain polycrystals of MgO have been prepared from a Mg(OH)2 powder by reactive hot-pressing at 900°C. The densification rate is discussed in terms of superplastic deformation. The bend strength and the effective surface energy for fracture initiation y. have been determined as a function of porosity between room temperature and112000~. A rapid increase in yi with temperature is observed ab...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1993
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.79.8_n576