High Temperature Oxidation Behavior of Ti2AlNb Intermetallic Alloys
نویسندگان
چکیده
منابع مشابه
High Temperature Erosion- Oxidation Behavior of Nickel- Based Alloys Containing Mo in Fluidized Bed Waste Incineration
High-temperature erosion-oxidation behavior of nickel-based alloys containing 0-7 wt.% Mo in fluidized bed waste incineration conditions was studied. A stream of hot condensed air with a flow rate of 25 L/min caused hot silica sand (700 °C) mixed with 0.5 wt.% of chloride salts to hit the specimens for 250 h. By removing the erosive factor, the high-temperature oxidation behavior of the alloys ...
متن کاملThe Grain Boundary Character Distribution of the Orthorhombic Phase in Ti2AlNb Intermetallic Alloys
The grain boundary character distribution (GBCD) of the orthorhombic (O) phase in near Ti2AlNb intermetallic alloys was investigated. The alloys were prepared by either induction heating above the body centered cubic (BCC) transus or by subtransus processing through pancake forging and hot-packed rolling. Using electron backscatter diffraction (EBSD), the twin-related O-phase variant interfacia...
متن کاملThe Study of High Temperature Oxidation behavior of Different Microstructures of HVOF Thermally Sprayed Coatings
Improvement of thermally sprayed coating properties by microstructure modification has been considered as a significant solution. Therefore, in this research the effect of dissolved oxygen content and post heat treatment on the formation and distribution of secondary phase particles, particularly in nano-scale in the coatings during spraying and after that were studied. Ni-5 wt% Al powders were...
متن کاملMicrostructure-Property Relationships of Two Ti2AlNb-based Intermetallic Alloys: Ti-15Al-33Nb(at.%) and Ti-21Al-29Nb(at.%)
Two Ti2AlNb intermetallic orthorhombic (O) alloys, Ti-15Al-33Nb and Ti-21Al29Nb(at.%), were subtransus processed into sheets, using pancake forging and hot-pack rolling, and evaluated in tension (25 and 650°C) and creep (650-710°C) and the properties and deformation behavior were related to microstructure. Some of the microstructural features evaluated were grain boundary character, grain size,...
متن کاملHigh-temperature Corrosion Behavior of Iron Aluminide Alloys and Coatings
A multi-year effort has been focused on optimizing the long-term oxidation performance of ingot-processed (IP) and oxide-dispersion strengthened (ODS) Fe3Al and iron aluminidebased coatings. Based on results from several composition iterations, a Hf-doped alloy (Fe28Al-2Cr-0.05at.%Hf) has been developed with significantly better high temperature oxidation resistance than other iron aluminides. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Metallurgical & Materials Engineering
سال: 2015
ISSN: 2455-2372
DOI: 10.15344/2455-2372/2015/112