منابع مشابه
High temperature and pressure electrochemical test station.
An electrochemical test station capable of operating at pressures up to 100 bars and temperatures up to 400 °C has been established. It enables control of the partial pressures and mass flow of O2, N2, H2, CO2, and H2O in a single or dual environment arrangement, measurements with highly corrosive media, as well as localized sampling of gas evolved at the electrodes for gas analysis. A number o...
متن کاملFEM Modeling of the Relationship between the High-Temperature Hardness and High-Temperature, Quasi-Static Compression Experiment
The high-temperature hardness test has a wide range of applications, but lacks test standards. The purpose of this study is to develop a finite element method (FEM) model of the relationship between the high-temperature hardness and high-temperature, quasi-static compression experiment, which is a mature test technology with test standards. A high-temperature, quasi-static compression test and ...
متن کاملA Fiber Detector Radiation Hardness Test
An intense 146 MeV/c pion beam was stopped inside a scintillating fiber detector made out of 12 planes with 16 pixels each, where every pixel consists out of 8 × 8 scintillating fibers of 500 μm diameter dense packed. The detector was irradiated for 52 hours to more than 1 Mrad at its center. Before and directly after the irradiation the detector has been exposed to a particle beam to compare t...
متن کاملHigh Temperature Superconductor test for dual bore quadrupole magnet design
This paper reports results of the test of HTS conductor manufactured by Intermagnetics General Corporation (IGC). The HTS version of the CESR dual bore quadrupole magnet has been analyzed using data obtained in this test. 1 HTS test The main purpose of the experiments described below was to obtain HTS characteristics needed for magnet design. The prime goal was to measure the HTS performance de...
متن کاملTemperature-Dependence of Hardness and Wear Resistance of Stellite Alloys
A group of Stellite alloys are studied in consideration of temperature effects on their hardness and wear resistance. The hardness test is conducted on a micro-hardness tester with a hot stage equipped that allows heating the specimen up to 650°C. The wear resistance of each alloy is evaluated using a pin-on-disc tribometer with a heating furnace built-in that provides the temperature capacity ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 1989
ISSN: 1882-675X,0912-0289
DOI: 10.2493/jjspe.55.1337