HIGH TEMPERATURE CURING AGENT FOR CHLOROPRENE RUBBER
نویسندگان
چکیده
منابع مشابه
A Prediction Model for Rubber Curing Process
A prediction method for rubber curing process has historically received considerable attention in manufacturing process for rubber article with relatively large size. In recent years, there exists increasing demand for simulation driven design which will cut down the cost and time required for product development. In case of the rubber with relatively large dimensions, low thermal conductivity ...
متن کاملAn investigation on chloroprene-compatibilized acrylonitrile butadiene rubber/high density polyethylene blends
Blends of acrylonitrile butadiene rubber/high density polyethylene (NBR/HDPE) compatibilized by Chloroprene rubber (CR) were prepared. A fixed quantity of industrial waste such as marble waste (MW, 40 phr) was also included. The effect of the blend ratio and CR on cure characteristics, mechanical and swelling properties of MW-filled NBR/HDPE blends was investigated. The results showed that the ...
متن کاملCatalyzed Synthesis and Characterization of a Novel Lignin-Based Curing Agent for the Curing of High-Performance Epoxy Resin
In this study, lignin, an aromatic compound from the forestry industry, was used as a renewable material to synthesize a new aromatic amine curing agent for epoxy resin. Firstly, lignin was separated from black liquor and hydroxyl groups were converted to tosyl groups as leaving groups. Then, primary amination was conducted using an ammonia solution at high pressure and temperature, in the pres...
متن کاملInvestigating the Effect of Curing Agent and Casting Temperature on Pot Life of Binder System Based on HTPB
Effect of temperature and curing agent type parameters on rheological behavior of binder system based on Hydroxyl terminated Polybutadiene (HTPB) is important in the aspect of production for medium and large-size grains. In this research, the effect of casting temperature 40, 50 and 60 ºC) and chemical structure of curing agents (TDI, IPDI and HDI) on rheological behavior of a binder system bas...
متن کاملEco-friendly Self-curing Concrete Incorporated with Polyethylene Glycol as Self-curing Agent (RESEARCH NOTE)
Today concrete is most generally utilized development material in the world due to its strength and sturdiness properties. To attain good strength, curing of concrete is important so we introduce the concept of self-curing concrete rather than immersion or sprinkle curing to avoid water scarcity. It was observed that water solvent polymers can be utilized as a self-curing agent, i.e. polyethyle...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: NIPPON GOMU KYOKAISHI
سال: 1975
ISSN: 1884-0442,0029-022X
DOI: 10.2324/gomu.48.107