High Temperature Creep of Dispersion-Strengthened Aluminum-Beryllium Alloys
نویسندگان
چکیده
منابع مشابه
Ductility of 6XXX aluminum alloys at high temperature
3914)"Graduate Student, Department of Materials Science & Engineering, Faculty of Engineering, Shibaura Institute of Technology (3914 Shibaura, Minato-ku, Tokyo 1088548). 芝浦工業大学大学院生(東京都)〔現在財日本品質保証機構(東京都)〕"Graduate Student, Shibaura Institute of Technology (Minatoku, Tokyo).〔Present: Japan Quality Assurance Organization (Setagaya-ku, Tokyo)〕. 芝浦工業大学工学部(東京都)"Faculty of Engineering, Sh...
متن کاملEnhanced Densification of Cavitated Dispersion- Strengthened Aluminum by Thermal Cycling
We report experimental data of creep cavity shrinkage for dispersion-strengthened-cast aluminum with about 23 vol pct submicron Al2O3 dispersoids, annealed isothermally or subjected to thermal cycling without applied stress. Thermal cycling is found to increase the rate of densification by a factor of 3 to 5.5 relative to isothermal annealing at the upper cycling temperature, allowing for recov...
متن کاملMicrostructure, Mechanical and Tribological Properties of Oxide Dispersion Strengthened High-Entropy Alloys
A novel metal matrix composite CrMnFeCoNi with Y₂O₃ as reinforcement phase was designed and manufactured by mechanical alloying and spark plasma sintering. After sintering at 900 °C for 5 min, the microstructure consisted of a FCC matrix and Y₂O₃ nanoparticles. The addition of 0.25 wt % Y₂O₃ increased the room temperature tensile strength of the CrMnFeCoNi base from 868 MPa to 1001 MPa, while t...
متن کاملUltralow Temperature Anelasticity of Aluminum-Magnesium Alloys
Results of internal friction measurements on the commercial aluminum-magnesium alloys 5052,5086 and 5486 are reported here over the temperature range 50 mK to 300 K, and compared with published data on alloy 5056. Effects of heat treatment and explosive bonds on the internal friction are evaluated. The quality factor of proposed multi-layer aluminum-alloy spherical resonant-mass detectors of gr...
متن کاملDevelopment of a Nanoscale Precipitation-Strengthened Creep-Resistant Aluminum Alloy Containing Trialuminide Precipitates
Development of a Nanoscale Precipitation-Strengthened Creep-Resistant Aluminum Alloy Containing Trialuminide Precipitates Keith Edward Knipling This research is toward developing a castable andheat-treatable precipitation-strengthened aluminum alloy exhibiting coarseningand creep resistance at temperatures exceeding 400°C. Criteria for selecting alloying elements capable of producing such an al...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1982
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.46.4_353