High Temperature Corrosion Studies of a Zirconia Coating: Implications for Waste-to-Energy (WTE) Plants
نویسندگان
چکیده
منابع مشابه
Fate of Heavy Metals in Waste to Energy (wte) Processes
This study was done to increase the understanding of how heavy metals in the aqueous phase are removed at low initial concentrations in different pH and Eh values. The reaction that has been studied is mainly hydroxide precipitation and adsorption in a condensate treatment. In the study, data from one of Vattenfalls waste incinerators was analysed and the results from the data were then compare...
متن کاملNanosilica coating for bonding improvements to zirconia
Resin bonding to zirconia cannot be established from standard methods that are currently utilized in conventional silica-based dental ceramics. The solution-gelatin (sol-gel) process is a well developed silica-coating technique used to modify the surface of nonsilica-based ceramics. Here, we use this technique to improve resin bonding to zirconia, which we compared to zirconia surfaces treated ...
متن کاملWaste-to-energy plants based on gasification are high-efficiency power plants
The enormous increase in the quantum and diversity of waste materials and their potentially harmful effects on the general environment and public health, have led to an increasing awareness about an urgent need to adopt scientific methods for safe disposal of wastes. While there is an obvious need to minimize the generation of wastes and to reuse and recycle them, the technologies for recovery ...
متن کاملGraphene: corrosion-inhibiting coating.
We report the use of atomically thin layers of graphene as a protective coating that inhibits corrosion of underlying metals. Here, we employ electrochemical methods to study the corrosion inhibition of copper and nickel by either growing graphene on these metals, or by mechanically transferring multilayer graphene onto them. Cyclic voltammetry measurements reveal that the graphene coating effe...
متن کاملبررسی خواص پوشش های سد حرارتی ,csz ,csz-(micro)al2o3 csz-(nano)al2o3 بر روی سوپر آلیاژ پایه نیکل (اینکنل-738) به روش پاشش پلاسما
thermal barrier coatings (tbcs) are used to provide thermal insulation to the hot section components of gas turbines in order to enhance the operating temperature and turbine efficiency. hot corrosion and thermal shocks are the main destructive factors in tbcs which comes as a result of oxygen and molten salt diffusion into the coating. in this thesis atmospheric plasma spraying was used to dep...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Coatings
سال: 2016
ISSN: 2079-6412
DOI: 10.3390/coatings6030036