High Temperature Behavior of TiN Film Formed by Reactive Ion Plating.
نویسندگان
چکیده
منابع مشابه
High Temperature Behavior of Dual Phase Steels
Dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500C. Stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500C, and smooth flow at the other temperatures. Both yield and ultimate tensile strengths increased with increasing testing temperature up to about 450<sup...
متن کاملHigh-definition conductive silver patterns on polyimide film via an ion exchange plating method
In this work, we developed a new ion exchange plating (IEP) method that is different to traditional electrochemical plating or electroless plating techniques. A variety of silver patterns were prepared by using the IEP technique as demonstrated in this work. The key factors to the definition and the conductive performance of silver patterns were systematically studied. Mechanisms of the formati...
متن کاملHeteroepitaxial growth of TiN film on MgO (100) by reactive magnetron sputtering
TiN thin films were deposited on MgO (100) substrates at different substrate temperatures using rf sputtering with Ar/N2 ratio of about 10. At 700°C, the growth rate of TiN was approximately 0.05 μm/h. The structural and electrical properties of TiN thin films were characterized with x-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), transmission electro...
متن کاملCharacterization of Oxide Film Formed on Ck45 Steel by Plasma Electrolytic Oxidation Method
Plasma electrolytic oxidation (PEO) is the new, environmentally and cost-effective method for coating the metals. This method vastly has been studied for coating Aluminum, Titanium and Magnesium and their alloys and recently for steel. In present study, Ck45 steel samples were coated by PEO method in order to improve corrosion resistance. During this process specimens were immerged in carbonate...
متن کاملThickness Dependence of Sensitivity in Thin Film Tin Oxide Gas Sensors Deposited by Vapor Pyrolysis
Transparent SnO2 thin films were deposited on porcelain substrates using a chemical vapor deposition technique based on the hydrolysis of SnCl4 at elevated temperatures. A reduced pressure self-contained evaporation chamber was designed for the process where the pyrolysis of SnCl4 at the presence of water vapor was carried out. Resistive gas sensors were fabricated by providing ohmic contacts o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 1994
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.45.786