High Technical Process by Low Temperature Plasma
نویسندگان
چکیده
منابع مشابه
A new low-temperature high-aspect-ratio MEMS process using plasma activated wafer bonding
This paper presents the development and characterization of a new high-aspect-ratio MEMS process. The silicon-on-silicon (SOS) process utilizes dielectric barrier discharge surface activated low-temperature wafer bonding and deep reactive ion etching to achieve a high aspect ratio (feature width reduction-to-depth ratio of 1:31), while allowing for the fabrication of devices with a very high an...
متن کاملHigh sensitivity imaging Thomson scattering for low temperature plasma.
A highly sensitive imaging Thomson scattering system was developed for low temperature (0.1-10 eV) plasma applications at the Pilot-PSI linear plasma generator. The essential parts of the diagnostic are a neodymium doped yttrium aluminum garnet laser operating at the second harmonic (532 nm), a laser beam line with a unique stray light suppression system and a detection branch consisting of a L...
متن کاملLow Temperature Nitridation Combined With High Temperature Buffer Annealing for High Quality GaN Grown by Plasma- Assisted MBE
The effect of the initial nitridation of the sapphire substrate on the GaN crystal quality as a function of substrate temperature was studied. GaN layers were grown by plasma-assisted molecular beam epitaxy (MBE) on sapphire substrates nitridated at different substrate temperatures. A strong improvement in the GaN crystal quality was observed at 100 °C nitridation temperature. Symmetric (0004) ...
متن کاملLOW TEMPERATURE SYNTHESIS OF NANOCRYSTALLINE MgAl2O4 SPINEL VIA SUCROSE PROCESS
Abstract: Nanocrystalline MgAl2O4 spinel powder was synthesized using metal nitrates and a polymer matrix-based composed of sucrose and polyvinyl alcohol (PVA). The precursor and the calcined powders were characterized by simultaneous thermal analysis (STA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM). According to XRD res...
متن کاملA Low Temperature, Low Stress SiGe Process
In this project, we developed a low temperature (≤450C) silicon-germanium (SiGe) process using the Thermcopoly1/2 furnaces at SNF. Low stress (≤100MPa) poly SiGe has been successfully demonstrated with a deposition temperature below 450C and desired Si to Ge content ratio. Our SiGe deposition process is CMOS compatible and can enable a number of applications for microelectromechanical systems (...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sen'i Gakkaishi
سال: 1992
ISSN: 0037-9875,1884-2259
DOI: 10.2115/fiber.48.7_p425