High strain rate thermoplastic demolding of metallic glasses
نویسندگان
چکیده
منابع مشابه
High-rate squeezing process of bulk metallic glasses
High-rate squeezing process of bulk metallic glasses from a cylinder into an intact sheet achieved by impact loading is investigated. Such a large deformation is caused by plastic flow, accompanied with geometrical confinement, shear banding/slipping, thermo softening, melting and joining. Temperature rise during the high-rate squeezing process makes a main effect. The inherent mechanisms are i...
متن کاملHigh-frequency dynamics in metallic glasses.
Using inelastic x-ray scattering we studied the collective dynamics of the glassy alloy Ni33Zr67 in the first pseudo-Brillouin-zone, an energy-momentum region still unexplored in metallic glasses. We determine key properties such as the momentum transfer dependence of the sound velocity and of the acoustic damping, discussing the results in the general context of recently proposed pictures for ...
متن کاملThermoplastic Forming and Related Studies of the Supercooled Liquid Region of Metallic Glasses
The thermoplastic formability (TPF) of metallic glasses was found to be related to the calorimetrically measured crystallization temperature minus the glass transition temperature, Tg Tx = ΔT. Alloy development in the ZrTiBe system identified a composition with ΔT = 120 °C. Many alloys with ΔT > 150 °C and one alloy, Zr35Ti30Be27.5Cu7.5, with ΔT = 165 °C were discovered by substituting Be with ...
متن کاملSub-second thermoplastic forming of bulk metallic glasses by ultrasonic beating.
The work proposed a novel thermoplastic forming approach-the ultrasonic beating forming (UBF) method for bulk metallic glasses (BMGs) in present work. The rapid forming approach can finish the thermoplastic forming of BMGs in less than one second, avoiding the time-dependent crystallization and oxidation to the most extent. Besides, the UBF is also proved to be competent in the fabrication of s...
متن کاملRate dependent of strength in metallic glasses at different temperatures
The correlation between the strength at the macroscale and the elastic deformation as well as shear cracking behavior at the microscale of bulk metallic glasses (BMGs) is investigated. The temperatures of 298 K and 77 K as well as the strain rate ranging from 10(-6) s(-1) to 10(-2) s(-1) are applied to the BMGs, in which the mechanical responses of the BMGs are profiled through the compression ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Scripta Materialia
سال: 2016
ISSN: 1359-6462
DOI: 10.1016/j.scriptamat.2016.06.021