High strain-rate response of commercially pure vanadium
نویسندگان
چکیده
منابع مشابه
High strain-rate response of commercially pure vanadium
To understand the plastic ̄ow behavior of commercially pure vanadium under high strain rates, uniaxial compression tests of cylindrical samples are performed using UCSD's enhanced Hopkinson technique. True strains exceeding 50% are achieved in these tests, over a range of temperature from 77 to 800 K at the strain rates of 2500 and 8000 sÿ1. The microstructure of the deformed and undeformed sam...
متن کاملMarginal and internal adaptation of commercially pure titanium and titanium-aluminum-vanadium alloy cast restorations.
AIM The purpose of this in vitro study was to investigate the marginal accuracy and internal fit of complete cast crowns and three-unit fixed partial dentures (FPDs) cast with commercially pure titanium (CPTi) and Titanium-Aluminum-Vanadium alloy (Ti-6Al-4V). METHODS AND MATERIALS CPTi and Ti-6Al-4V alloy were used to cast twelve single crowns and twelve three-unit FPDs. A traveling microscop...
متن کاملA quantitative comparison of machined commercially pure titanium and titanium-aluminum-vanadium implants in rabbit bone.
Screw-shaped implants made from rods of commercially pure titanium (grade 1) and titanium-aluminum-vanadium (grade 5) were machined, and the implant surface structures were numerically described before being placed in rabbit tibiae for healing periods of 1 months, 6 months, and 12 months. Quantitative comparisons of the removal torque (Ncm) necessary to loosen the implants from the bone bed wer...
متن کاملInvestigation on the Deformation Behavior and Strain Distribution of Commercially Pure Aluminum after Circular Simple Shear Extrusion
Circular simple shear extrusion process was introduced as a new geometry for simple shear extrusion technique to fabricate ultrafine-grained materials. Similar to the simple shear extrusion method, this process is also based on direct extrusion, and the samples deform in a simple shear manner. In this investigation, the simulations were carried out using the commercial finite element code ABAQU...
متن کاملMicrostructure Development and Hardening during High Pressure Torsion of Commercially Pure Aluminium: Strain Reversal Experiments and a Dislocation Based Model
The effect of strain reversal on hardening due to high pressure torsion (HPT) was investigated using commercially pure aluminium. Hardening is lower for cyclic HPT (c-HPT) as compared to monotonic HPT (m-HPT). When using a cycle consisting of a rotation of 90° per half cycle, there is only a small increase in hardness if the total amount of turns is increased from 1 to 16. Single reversal HPT (...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mechanics of Materials
سال: 2000
ISSN: 0167-6636
DOI: 10.1016/s0167-6636(99)00056-3