High Strain Rate Deformation Behaviour of Steels for Auto-Body

PREDICTION OF HOT DEFORMATION BEHAVIOUR OF A PH STAINLESS STEEL AT HIGH STRAIN RATES

In this study the hot deformation behaviour of a precipitation hardened (PH) stainless steel at high strain rates has been predicted through hot compression testing. Stress-strain curves were obtained for a range of strain rates from 10-3 to 10+1 S-1 and temperatures from 850 to 1150°C. Results obtained by microstructure and stress-strain curves show that at low temperatures and high strain rat...

High Strain Rate Characterization of Advanced High Strength Steels

Influence of High Strain Rates on the Mechanical Behavior of High-Manganese Steels

In this work, dynamic mechanical properties of three high-manganese steels with TRIP/TWIP or fully TWIP characteristics are studied. High strain rate experiments in the range of true strain rates between ~500 and 1800 /s are conducted using a dynamic torsional testing setup. All the three steels show a positive strain rate sensitivity in the intermediate range of strain rates (up to 500 /s). Bu...

High strain rate compressive behaviour of a Silicone Elastomer

The high strain rate compressive behaviour of a Silicone elastomer: Sylgard 184® is presented. Experiments were performed over strain rates between 3000 and 15,000 s -1 , and temperatures between -40 and +73 oC, corresponding to environmental conditions in many industrial applications. An Ogden strain energy density function was fit to the data, and the strain rate and temperature dependence of...

Dynamic tensile test and specimen design of auto-body steel sheet at the intermediate strain rate

In this paper, the tensile testing method at the intermediate strain rate is established and tensile tests of steel sheets for an auto-body have been performed to evaluate dynamic material properties. A high speed tensile testing machine has been developed for tensile tests at the intermediate strain rate. A simple jig fixture for gripping a specimen has been designed to diminish the load ringi...