High strain rate compressive response of ultra-high molecular weight polyethylene fibre composites

The compressive response of ultra-high molecular weight polyethylene fibres and composites

Measurements are reported for the compressive response of ultra-high molecular weight polyethylene (UHMWPE) fibres and laminated composites loaded along the fibre direction. The compressive strength of the fibres was measured by both recoil tests and knot (or bend) tests. The strength of the fibres is governed by micro-kinking of the fibrils within the fibres. The recoil tests suggest that this...

Wear of Ultra High Molecular Weight Polyethylene

Preparation of Ultra High Molecular Weight Polyethylene Using Ziegler-Natta Catalyst System: Optimization of Parameters by Response Surface Methodology

Synthesis of high molecular weight polyethylene using FI catalyst

A FI Zr-based catalyst of bis[N-(3,5-dicumylsalicylidene)-2′,6′­diisopropylanilinato]zirconium(IV) dichloride was prepared and used for polymerization of ethylene. The effects of reaction conditions on the polymerization were examined in detail. The increase in ethylene pressure and rise in polymerization temperature up to 35 oC were favorable for catalyst/MAO to raise the catalytic activity as...

Synthesis and Tribological Behavior of Ultra High Molecular Weight Polyethylene (UHMWPE)-Lignin Composites

In this paper, we report the synthesis and characterization of ultra-high molecular weight polyethylene (UHMWPE)-lignin composites. During this study four different compositions, namely UHMWPE, UHMWPE-13 wt. % lignin, UHMWPE-25 wt. % lignin and UHMWPE-42.5 wt. % lignin were fabricated by hot pressing. Detailed microstructural studies by scanning electron microscopy (SEM) showed that UHMWPE and ...