High Stability Industrial-Grade Nd: YVO4 Picosecond Laser Amplifier With High Average Output Power

نویسندگان

چکیده

We demonstrate a high-power Nd: YVO 4 picosecond laser amplifier that is capable of generating 51.5 W average output power at wavelength 1,064 nm, with repetition rate 70 MHz and pulse duration 8.5 ps. This system encompasses three stages diode end-pumped amplification including two double-pass amplifiers single-pass amplifier. Laser near-diffraction-limited beam quality ( M 2 < 1.1) was maintained throughout the entire scaling range laser. The exhibited very high stability root-mean-square amplitude fluctuation less than 0.2% over period 15 h continuous operation.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

High average power picosecond pulse and supercontinuum generation from a thulium-doped, all-fiber amplifier.

We demonstrate a high-power, picosecond, thulium-doped, all-fiber master oscillator power amplifier with average power of 120.4 W. The compact fiber oscillator is carefully designed with high repetition rate for the purpose of overcoming the detrimental effects of fiber nonlinearity in the later fiber amplifiers. The pulse duration of 16 ps at 333.75 MHz repetition rate results in a peak power ...

متن کامل

Laser Cooled High-Power Fiber Amplifier

A theoretical model for laser cooled continuous-wave fiber amplifier is presented. The amplification process takes place in the Tm 3+ -doped core of the fluoride ZBLAN (ZrF4-BaF2LaF3-AlF3-NaF) glass fiber. The cooling process takes place in the Yb 3+ :ZBLAN fiber cladding. It is shown that for each value of the pump power and the amplified signal there is a distribution of the concentration of ...

متن کامل

High Q Power Divider/Combiner with High Output Isolation using Substrate Integrated Waveguide Technology

A power divider (PD)/ power combiner (PC) with high quality factor and enhanced output ports isolation using substrate integrated waveguide (SIW) technology is proposed. An SIW cavity is designed to provide a high quality factor filtering response and an SMD resistor is attached between two output ports to realize the high isolation. The value of the applied resistor is calculated by using the ...

متن کامل

Optical Fiber Pumped High Repetition Rate and High Power Nd:YVO4 Picosecond Regenerative Amplifier

We report a stable optical fiber pumped Nd:YVO4 all solid state regenerative amplifier with all fiber picosecond laser as seed source. 888 nm Yb optical fiber lasers was chosen as pump source to reduce quantum defect for improved thermal performance. At the repetition rate of 99.6 kHz, maximum power of 19.63 W with 36 ps pulse duration were achieved when seeded by a 150 mW picosecond oscillator...

متن کامل

Twenty-watt average output power, picosecond thin-rod Yb:YAG regenerative chirped pulse amplifier with 200 μJ pulse energy

A high-average power, laser-diode-pumped, picosecond-pulse regenerative chirped pulse amplifier was developed by using the thin-rod Yb:YAG laser architecture. An average output power of 20 W was achieved at a repetition rate of 100 kHz with an output pulse width of 2 ps. 2008 Optical Society of America OCIS codes: (140.3280) Lasers, amplifiers, (140.3615) Lasers, ytterbium, (140.3480) Lasers, ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Frontiers in Physics

سال: 2022

ISSN: ['2296-424X']

DOI: https://doi.org/10.3389/fphy.2022.876222