High-Speed Friction-Stir Welding to Enable Aluminum Tailor-Welded Blanks
نویسندگان
چکیده
منابع مشابه
Effect of friction stir welding parameters on the ultimate tensile strength of Al-Cu tailor welded blanks
In the present study, parameters of tool rotation speed, tool travel speed and tool offsetting with different levels were used in the friction stir welding (FSW) of aluminum-copper tailor welded blanks (TWBs). The FSW of pure copper to 5052 aluminum alloy were carried out by varying tool rotation speed from 800 rpm to 1200 rpm, tool travel speed from 40 mm/min to 80 mm/min and tool offsetting f...
متن کاملSuperplastically Formed Friction Stir Welded Tailored Aluminum and Titanium Blanks for Aerospace Applications
The purpose of this study was to develop a specialized Friction Stir Welding process for superplastic grade aluminum alloy 5083-SP and titanium alloy 6Al-4V, in thickness of 1.5 to 4 mm, such that the butt welded nugget would have equal superplastic forming (SPF) characteristics as the parent sheet material The concept of using tailored blanks for the SPF process is proposed which will allow th...
متن کاملAnalysis and Comparison of Friction Stir Welding and Laser Assisted Friction Stir Welding of Aluminum Alloy
Friction Stir Welding (FSW) is a solid-state joining process; i.e., no melting occurs. The welding process is promoted by the rotation and translation of an axis-symmetric non-consumable tool along the weld centerline. Thus, the FSW process is performed at much lower temperatures than conventional fusion welding, nevertheless it has some disadvantages. Laser Assisted Friction Stir Welding (LAFS...
متن کاملInfluence of gas tungsten arc welding parameters on the formability of aluminum tailor welded blanks
Welding method and its parameters has an important effect on the formability and mechanical properties of tailor welded blanks(TWBs). In this study gas tungsten arc welding(GTAW) is used to joint aluminum TWBs. Aluminum TWBs consist of 6061 aluminum sheets with different thickness of 1mm and 2mm. Main parameters of GTAW consist of welding current, pressure of shielding gas, welding speed and di...
متن کاملEffect of Welding Speed on Defect Features and Mechanical Performance of Friction Stir Lap Welded 7B04 Aluminum Alloy
Friction stir lap welding of 7B04 aluminum alloy was conducted in the present paper, and the effect of welding speed on the defect features and mechanical performance of lap joints was investigated. The results indicate that the hook defect at the advancing side (AS) can reduce the effective thickness of the top sheet, and the sheet thinning level is gradually lowered by increasing the welding ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOM
سال: 2015
ISSN: 1047-4838,1543-1851
DOI: 10.1007/s11837-015-1384-x