High Speed Air Turbine Spindle with Porous Bearings (TPF)
نویسندگان
چکیده
منابع مشابه
High-speed Electrical Motor/generator Supported by Air Bearings
This paper reports on the development of a high-speed electrical machine which can be used as motor or generator for application in micro heat engines. The machine has a rated power of 200 W at a rotational speed of 600 000 rpm and is supported by self-acting air bearings. The design process outlined in the paper focuses on aspects such as electromagnetic design, bearing design, rotordynamic be...
متن کاملCharacterization of Porous Graphite Air Bearings
Byron R. Knapp, Brian P. O’Connor, Eric R. Marsh Machine Dynamics Research Lab The Pennsylvania State University, University Park, PA Introduction As the demand for higher precision machine tools and inspection equipment grows, there is a need for more precise bearing systems. The error motions of bearings with mechanical contact are dominated by the geometric and surface finish errors of their...
متن کاملComparison of Bearings --- For the Bearing Choosing of High-speed Spindle Design
There are many types of bearings available, each used for different purposes and different conditions. Two major types of bearings are contact bearings and noncontact bearings. By considering the ball material, I separate the contact bearings to steel bearings and ceramic ball bearings. On the other hand, there are bearings that can run without any contact between the sliding surfaces in the be...
متن کاملOptimum Design of the Air-turbine for the High-speed Dental Air-turbine Handpiece Using Design of Experiment
High-pressure air enters the air-turbine of the dental handpiece and strikes the blades to drive the impeller. The air-turbine has impeller and the air tube is connected to the air-turbine housing. The flowfield of the air-turbine were investigated for the optimum air-turbine design using ANSYS CFX. The objective of the research was to find an optimum design variables for the air-turbine to inc...
متن کاملStudy of Micro-High Speed Bearings and
Micromachine gas turbines require extremely high rotor speed to realize the same impeller tip speed to the large gas turbines, by very small diameter of the impellers. Hence, the rotordynamics is one of the critical issues. Especially, the bearing speed will exceed the range of experience in any existing turbomachines, and hence the method to achieve the stable operation at the required design ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of the Japan Institute of Metals
سال: 1979
ISSN: 0021-4426,1884-5835
DOI: 10.2320/materia1962.18.288