High Resolution in Seismic Refraction Tomography for Environmental Study

HIGH RESOLUTION SEISMIc REFRAcTION TOMOGRAPHY FOR DETERMINING DEPTH OF BLAST INDUcED DAMAGE IN A MINE WALL

High resolution seismic refraction tomography has proved to be a useful tool to effectively estimate depth of blast induced damage in a mine face. Excavation blast damage can be as shallow as 1 to 2m and requires resolution at a fraction of a meter for effective imaging. We used an accelerometer with flat frequency response to 1000Hz to record data at spacings of approximately 0.25 to 0.5m alon...

High-resolution surface-wave tomography from ambient seismic noise.

Cross-correlation of 1 month of ambient seismic noise recorded at USArray stations in California yields hundreds of short-period surface-wave group-speed measurements on interstation paths. We used these measurements to construct tomographic images of the principal geological units of California, with low-speed anomalies corresponding to the main sedimentary basins and high-speed anomalies corr...

Application of Seismic Refraction Tomography to Karst Cavities

For three years we have used synthetic and field data to investigate the effectiveness of commercial refraction tomography codes on both simple and complex subsurface velocity structures, with the ultimate goal of determining the suitability of the method for karst problems. The results of these studies indicate that refraction tomography is able to resolve karst features under some conditions....

Time-lapse refraction seismic tomography for the detection of ground ice degradation

The ice content of the subsurface is a major factor controlling the natural hazard potential of permafrost degradation in alpine terrain. Monitoring of changes in ice content is therefore similarly important as temperature monitoring in mountain permafrost. Although electrical resistivity tomography monitoring (ERTM) proved to be a valuable tool for the observation of ice degradation, results a...

High Resolution Computed Tomography