High-Quality Syngas Production by Chemical Looping Gasification of Bituminite Based on NiFe2O4 Oxygen Carrier

نویسندگان

چکیده

Chemical looping gasification (CLG) is an effective coal utilization technology. In this work, the CLG of bituminite was investigated through fixed-bed batch experiments using NiFe2O4 oxygen carrier (OC) to achieve high-quality syngas. The changes in phase during chemical reaction and mechanism were explored. results show that elevated temperature adding a fraction steam facilitate reaction. Adding appropriate amount ZrO2 into modification with alkali metal can enhance performance carrier. A carbon conversion 95% syngas (CO H2) selectivity 86% obtained under optimized conditions 950 °C, oxygen-carrier-to-bituminite (O/B) ratio 7:3, NiFe2O4/ZrO2 rate 0.08 mL/min. Modification by doping significantly process. Alkali lignin ash has more pronounced modifying effect on carriers than K2CO3. OC underwent gradual reduction Ni2+ → Ni Fe3+ Fe8/3+ Fe2+ Fe processes phase. addition, 20 redox cycles conducted demonstrate carriers’ good cyclic After cycles, maintained at about 90%, stably kept over 80%. This work laid theoretical foundation for clean efficient use bituminite.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Evaluation of CuO/MgAl2O4 in Biomass Chemical Looping Gasification with Oxygen Uncoupling

Chemical looping gasification (CLG) is a promising method for the utilization of biomass to produce syngas. However, its realization is largely dependent on the use of an oxygen carrier with a high and stable reactivity in cyclic reduction and oxidation. This work focused on the improvement of reactivity and stability of CuO in chemical looping gasification via the addition of MgAl2O4 as an ine...

متن کامل

Chemical-Looping Combustion and Gasification of Coals and Oxygen Carrier Development: A Brief Review

Chemical-looping technology is one of the promising CO2 capture technologies. It generates a CO2 enriched flue gas, which will greatly benefit CO2 capture, utilization or sequestration. Both chemical-looping combustion (CLC) and chemical-looping gasification (CLG) have the potential to be used to generate power, chemicals, and liquid fuels. Chemical-looping is an oxygen transporting process usi...

متن کامل

Syngas combustion in a 500 Wth Chemical-Looping Combustion system using an impregnated Cu-based oxygen carrier

Chemical-Looping Combustion (CLC) is an emerging technology for CO2 capture because separation of this gas from the other flue gas components is inherently to the process and thus no energy is expended for the separation. For its use with coal as fuel in power plants, a process integrated by coal gasification and CLC would have important advantages for CO2 capture. This paper presents the combu...

متن کامل

application of upfc based on svpwm for power quality improvement

در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...

15 صفحه اول

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Energies

سال: 2023

ISSN: ['1996-1073']

DOI: https://doi.org/10.3390/en16083385