High-pressure high-temperature phase relations in MgAl2O4
نویسندگان
چکیده
منابع مشابه
High Temperature Behavior of Dual Phase Steels
Dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500C. Stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500C, and smooth flow at the other temperatures. Both yield and ultimate tensile strengths increased with increasing testing temperature up to about 450<sup...
متن کاملConsiderations of Well Cementing Materials in High-Pressure, High-Temperature Conditions (RESEARCH NOTE)
As worldwide demand of hydrocarbon is growing fast, the oil and gas companies have been forced to explore reservoirs with more hostile conditions, such as high-pressure, high-temperature conditions. Improved technology, material selection and testing procedures are required to overcome the common problems in these conditions. One of the main phases of well construction is cementing job. Appropr...
متن کاملYield Strength of Transparent MgAl2O4 Nano-Ceramic at High Pressure and Temperature
We report here experimental results of yield strength and stress relaxation measurements of transparent MgAl2O4 nano-ceramics at high pressure and temperature. During compression at ambient temperature, the differential strain deduced from peak broadening increased significantly with pressure up to 2 GPa, with no clear indication of strain saturation. However, by then, warming the sample above ...
متن کاملHigh-pressure, High-temperature Study of the Reaction of 10 Å Phase to 3.65 Å Phase
Introduction The 10 Å phase and 3.65 Å phase are dense hydrous magnesium silicates (DHMSs). These are phases that have been synthesized at high pressures in the system MgO-SiO2-H2O and proposed as storage sites for H2O in the Earth’s mantle. The 10 Å phase has been synthesized in a number of previous studies [e.g., 1-3]. It is readily formed from the reaction of talc with H2O at pressures of mo...
متن کاملHigh-Temperature Pressure Transducers
Pressure sensing systems operating at temperatures >200 °C are required for a variety of presentand next-generation applications ranging from oil field instrumentation to turbine engine control. Quite often, part or all of the sensing system must be physically removed from the hightemperature environment. In some cases, pressure translating devices and capillary tubes are used to isolate the se...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2010
ISSN: 1742-6596
DOI: 10.1088/1742-6596/215/1/012098