High Pressure and High Temperature Wells Cementation using Calcium Oxide Additives: Review

نویسندگان

چکیده

The challenges created by HPHT conditions make drilling and cementing difficult. overwhelming challenge stands for materials used wells operated at higher temperature pressures in the face of producing downhole. There is need better choice cement operations during development production wells. review method adopted this article considering Calcium Oxide which poses as good expander. In paper, a broad overview fundamental understanding use calcium oxide additive considered cementation will be discussed.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

High-pressure / High-temperature Synthesis of Transition Metal Oxide Perovskites

Perovskite and related Ruddlesden-Popper type transition metal oxides synthesised at high pressures and temperatures during the last decade are reviewed. More than 60 such new materials have been reported since 1995. Important developments have included perovskites with complex cation orderings on A and B sites, multiferroic bismuth-based perovskites, and new manganites showing colossal magneto...

متن کامل

Room-temperature spin-spiral multiferroicity in high-pressure cupric oxide

Multiferroic materials, in which ferroelectric and magnetic ordering coexist, are of fundamental interest for the development of multi-state memory devices that allow for electrical writing and non-destructive magnetic readout operation. The great challenge is to create multiferroic materials that operate at room temperature and have a large ferroelectric polarization P. Cupric oxide, CuO, is p...

متن کامل

Considerations of Well Cementing Materials in High-Pressure, High-Temperature Conditions (RESEARCH NOTE)

As worldwide demand of hydrocarbon is growing fast, the oil and gas companies have been forced to explore reservoirs with more hostile conditions, such as high-pressure, high-temperature conditions. Improved technology, material selection and testing procedures are required to overcome the common problems in these conditions. One of the main phases of well construction is cementing job. Appropr...

متن کامل

High-Temperature Pressure Transducers

Pressure sensing systems operating at temperatures >200 °C are required for a variety of presentand next-generation applications ranging from oil field instrumentation to turbine engine control. Quite often, part or all of the sensing system must be physically removed from the hightemperature environment. In some cases, pressure translating devices and capillary tubes are used to isolate the se...

متن کامل

CHEMICAL REACTION AT HIGH TEMPERATURE AND HIGH PRESSURE VI Polymorphic Transition in ZnP, at High Temperature and High Pressure

:1 new pressure-induced modification of zincdiphosphide, ZnP2, has been prepared by the di reel union o(zinc with phosphorus and also through the polymorphic transitions of both monoclinic and tetragonal ZnP2. The application of pressures above 20 kb combined with temperatures above 150'C is required for [be synthesis. The new modification of ZnP2 has a pseuda•cuhic cps[al symmetry with a latti...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Indian Journal of Petroleum Engineering (IJPE)

سال: 2021

ISSN: ['2582-9297']

DOI: https://doi.org/10.35940/ijpe.a1901.051121