High-Power 1180-nm GaInNAs DBR Laser Diodes
نویسندگان
چکیده
منابع مشابه
High-Power Pure Blue InGaN Laser Diodes
We fabricated high-power pure blue laser diodes (LDs) by using GaN-based material for full-color laser display. The operating output power, voltage and wall-plug efficiency of the LDs at forward current of 1.0 A were 1.17 W, 4.81 V and 24.3%, respectively. The estimated lifetime of the LDs was over 30,000 hours under continuous-wave operation. key words: InGaN, GaN, high-power laser, blue LD
متن کاملTreatment of lentigines by a novel high power diode laser at 755 nm: a case report
The use of high-power diode laser with a wavelength of 755 nm is an effective and safe method for the correction and partial and/or total elimination of pigmented lesions, specifically solar lentigines. This wavelength has yet not been used in diode lasers to treat solar lentigines. Side effects are the usual ones, including darkening and scab formation. Our patient was a 40-year-old woman of C...
متن کاملGenerating photoacoustic signals using high-peak power pulsed laser diodes
Photoacoustic signals are usually generated using bulky and expensive Q-switched Nd:YAG lasers, with limited scope for varying the pulse repetition frequency, wavelength and pulse width. An alternative would be to use laser diodes as excitation sources; these devices are compact, relatively inexpensive, and available in a wide variety of NIR wavelengths. Their pulse duration and repetition rate...
متن کاملAdvancement of High Power Laser Diodes for Pumping 2-micron
The reliability and lifetime demanded by spacebased applications of 2-micron solid state lasers are beyond the capability of currently available laser diode arrays. This paper provides the status of an ongoing technology advancement effort toward long-lifetime high power laser diode arrays suitable for pumping Thulium and Holmium based solid state lasers.
متن کاملCatastrophic optical damage of high power InGaAs/AlGaAs laser diodes
The defects generated by the catastrophic optical degradation (COD) of high power laser diodes have been examined using cathodoluminescence (CL). Discontinuous dark lines that correspond to different levels of damage have been observed along the ridge. Finite element methods have been applied to solve a physical model for the degradation of the diodes that explicitly considers the thermal and m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Photonics Technology Letters
سال: 2017
ISSN: 1041-1135,1941-0174
DOI: 10.1109/lpt.2017.2760038