High performance LATP thin film electrolytes for all-solid-state microbattery applications
نویسندگان
چکیده
A NASICON solid electrolyte Li 1+ x Al Ti 2− (PO 4 ) 3 (LATP) in a thin film form has been developed with ionic conductivities as high 0.1 mS cm −1 . route to achieve 100-fold increase the conductivity through post-annealing is discussed.
منابع مشابه
Surface/Interface Effects on High-Performance Thin-Film All-Solid-State Li-Ion Batteries.
The further development of all-solid-state batteries is still limited by the understanding/engineering of the interfaces formed upon cycling. Here, we correlate the morphological, chemical, and electrical changes of the surface of thin-film devices with Al negative electrodes. The stable Al-Li-O alloy formed at the stress-free surface of the electrode causes rapid capacity fade, from 48.0 to 41...
متن کاملNew Developments in Solid Electrolytes for Thin-Film Lithium Batteries
Research on lithium-ion secondary batteries began in the 1980s because of the growing demand for power sources for portable electronic devices. After the early 1990s, the demands for higher capacities and even smaller sizes energy systems significantly increased. Further, the explosive growth in the use of limited fossil fuels and their associated environmental issues and economical aspects are...
متن کاملIi. Solid State Thin Film Lithium Batteries
Solid state thin film lithium microbatteries fabricated by pulsed-laser deposition (PLD) are suggested. During deposition the following process parameters must be considered, which are laser energy and fluence, laser pulse duration, laser pulse frequency, target composition, background gasses, substrate temperature, target-substrate distance and orientation. The effects of the variations of the...
متن کاملAtomic layer deposition of lithium phosphates as solid-state electrolytes for all-solid-state microbatteries.
Atomic layer deposition (ALD) has been shown as a powerful technique to build three-dimensional (3D) all-solid-state microbattery, because of its unique advantages in fabricating uniform and pinhole-free thin films in 3D structures. The development of solid-state electrolyte by ALD is a crucial step to achieve the fabrication of 3D all-solid-state microbattery by ALD. In this work, lithium phos...
متن کاملSolid-state graft copolymer electrolytes for lithium battery applications.
Battery safety has been a very important research area over the past decade. Commercially available lithium ion batteries employ low flash point (< 80 °C), flammable, and volatile organic electrolytes. These organic based electrolyte systems are viable at ambient temperatures, but require a cooling system to ensure that temperatures do not exceed 80 °C. These cooling systems tend to increase ba...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of materials chemistry. A, Materials for energy and sustainability
سال: 2021
ISSN: ['2050-7488', '2050-7496']
DOI: https://doi.org/10.1039/d1ta02991f