High Manganese Non-Magnetic Steel Bar for Concrete Reinforcement
نویسندگان
چکیده
منابع مشابه
Acoustic Inspection of Coated Steel Bar in Reinforced Concrete Structure
Bridges with reinforeerneut corrosion problems are now under careful inspection in Taiwan. Costly maintenance programs are underway and raising S"erious safety concem. There are various engineering solutions to salt-induced corrosion. Among them epoxycoated reinforcing bars, commonly referred to as rebar, are frequently used in marine environment and other areas due to its durability, reasonabl...
متن کاملEffect of Reinforcing Bar Contamination on Steel-Concrete Bond During Concrete Construction
Synopsis: During concrete construction, form oil, bond breaker, concrete splatter and other types of contaminants often contaminate reinforcement. Current specifications and quality control measures require the removal and clean up of these contaminants before the placement of concrete due to a concern of a reduction in bonding capacity. This is costly, labor intensive, and may not be necessary...
متن کاملbond strength of reinforcement steel in self-compacting concrete
self-compacting concrete (scc) is a highly fluid yet stable concrete that can flow consistently under its own weight, pass between bars, and fill in formwork without the need of compaction. the application of scc effectively resolves the difficulties of concreting in situations with complicated formwork and congested reinforcements. in this paper, the bond between scc and steel reinforcement wa...
متن کاملBond of Reinforcement in High-Strength Concrete
This paper describes an examination of the development of tension lap splices in high-strength concrete and the applicability of the restriction in the ACI 318 code where the values of √fc′ used to calculate development length shall not exceed 100 psi. The focus is on the development of splices with Grade 60 epoxy-coated and uncoated bars in normalweight concrete. A summary of the behavior of b...
متن کاملBond of High Strength Concrete with High Strength Reinforcing Steel
This paper presents a study about the bond of high strength concrete with high strength steel. Fourteen pull out tests were carried out to determine the bond. The concrete strength was about 70 MPa and the steel was a 500 MPa grade. Bar diameters used were 12, 16, 20, 25, 28, 32 and 36 mm. In order to investigate the effect of cover, each test was done twice, once in a 240 mm diameter concrete ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Concrete Journal
سال: 1989
ISSN: 0387-1061
DOI: 10.3151/coj1975.27.10_15