High-flux plasma exposure of ultra-fine grain tungsten

Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite

TaC and HfC are thought to have the highest melting point (~4000°C) among all refractory materials. The binary solid solution of TaC and HfC (Ta4HfC5) is also considered as the most refractory material with the melting point over 4000 °C and valuable physical and mechanical properties. The main goal of this work is to fabricate TaC/HfCbased composites which consolidated by means of spark plasma...

Ultra-Fine Grained Dual-Phase Steels

This paper provides an overview on obtaining low-carbon ultra-fine grained dual-phase steels through rapid intercritical annealing of cold-rolled sheet as improved materials for automotive applications. A laboratory processing route was designed that involves cold-rolling of a tempered martensite structure followed by a second tempering step to produce a fine grained aggregate of ferrite and ca...

Special Grain Boundaries in Ultrafine-Grained Tungsten

Field ion microscopy and computer simulation were used for the study of an atomic structure high-angle grain boundary in hard-drawn ultrafine-grained tungsten wire. These boundaries with special misorientations are beyond the scope of the coincident site lattice model. It was demonstrated that the special non-coincident grain boundaries are the plane-matching boundaries, and rigid-body displace...

Development of Ultra-Fine-Grain Binderless cBN Tool for Precision Cutting of Ferrous Materials

Fine - Grain Parallelism

Computer hardware is at the beginning of the multi-core revolution. While hardware at the commodity level is capable of running concurrent software, most software does not take advantage of this fact because parallel software development is difficult. This project addressed potential remedies to these difficulties by investigating graphical programming and fine-grain parallelism. A prototype sy...